Yamaha III Storing the Edited Drum Kit, The following display appears, 1 Press the [ENTER/STORE] button, 3 Press the [ENTER/STORE] button again

Guide Quick

Quick Guide

Creating a Drum Kit

Storing the Edited Drum Kit

To store the original Drum Kit you’ve created thus far, follow the instructions below.

CAUTION

•When the [E] indicator is shown (meaning that the current Drum Kit has been modified but not yet stored), all your edits will be lost when selecting a different Drum Kit. Keep in mind that the Drum Kit may also be inadvertently changed by selecting a different Song. Make sure to store the edited Drum Kit before selecting a different Drum Kit or Song.

1 Press the [ENTER/STORE] button.The following display appears.

Destination Drum Kit bank Destination Drum Kit number

2 Select the destination Drum Kit memory.

First, move the cursor to the Drum Kit bank then select the desired one from “USR” and “EXT-A” through “EXT-P.” When you want to select a Drum Kit from “EXT-A” through “EXT-P,” make sure to connect the appropriate USB storage device to the USB TO DEVICE terminal.

Second, move the cursor to the Drum Kit number, then select the desired one.3 Press the [ENTER/STORE] button again.

The display prompts you for confirmation. To cancel the Store operation, press the [DEC/NO] button.

4 Press the [INC/YES] button to execute the Store operation.

CAUTION

•Never attempt to turn off the power while the message “Please keep power on” is shown; all data you have created may be lost. Only use the voltage specified as correct for the DTXTREME III.

42 DTXTREME III Owner’s Manual