Reference

Utility Mode [UTILITY]

Master Effect Settings

[SF2] MEF

2 3

1 5

4

CPre

You can set various parameters in order to change how the sound is affected by the selected Effect type. This parameter lets you call up the pre-programmed settings of these effect parameters. Data List booklet for information on the parameters for each Effect preset.

1Switch

Determines whether Master Effect is applied or not to the entire sound of the DTXTREME III.

Settings

off, on

 

 

DEffect parameter

The number of parameters and values available differs depending on the currently selected effect type. Refer to page 72 for details about the Effect parameters. Refer to the separate Data List booklet for information on the parameters for each Effect type.

EPAGE >

This appears when another page can be called up from the current page. Use the Cursor [M] or [N] button to call up another page.

BType

Determines the Master Effect type.

Settings

Details about the Effect types are described on page 70.

External Audio Settings

[F4] AUXIN

You can set parameters related to audio signals input via the AUX IN/SAMPLING IN jack.

Output Settings

[SF1] OUTPUT

From this display, you can set parameters such as volume and pan of the audio signals input via the AUX IN/SAM- PLING IN jack. These parameters are useful, for example, when playing or practicing along with a CD or other source connected to the AUX IN/SAMPLING IN jack.

1

1Volume

Determines the output level of the audio signals input via the AUX IN/SAMPLING IN jack.

Range

0 – 127

 

 

BPan

Determines the stereo pan position of the audio signals input via the AUX IN/SAMPLING IN jack.

Range

L63 (far left) – C (center) – R63 (far right)

 

 

CMono/Stereo

Determines the signal configuration for the audio signals input via the AUX IN/SAMPLING IN jack, or how the signal or signals are routed (stereo or mono).

Settings L mono, R mono, L+Rmono, stereo

L mono

Only the L channel of the audio input is used.

R mono

Only the R channel of the audio input is used.

L+Rmono

The L and R channels of the audio input are

 

mixed and processed in mono.

Stereo

Both the L and R channels of the audio input

 

are used.

DOutputSel

Determines the output jack assignment for the audio signals input via the AUX IN/SAMPLING IN jack.

EMic/Line

When using the AUX IN/SAMPLING IN jacks, this determines the input source, microphone (mic) or line.

mic

Intended for low output equipment, such as a

 

microphone, electric guitar or bass.

line

Intended for high output equipment, such as a

 

keyboard, synthesizer, or CD player.

128

DTXTREME III Owner’s Manual