Reference

File Mode [FILE]

Saving the Audio Data Assigned to a User Voice as a WAV or AIFF File

You can save the audio data assigned to a User Voice as a WAV file (Windows audio format) or an AIFF file (Macin- tosh audio format). After connecting the USB storage device to the instrument, follow the instructions below.

1 Press the [FILE] button to enter the File mode, then press the [F1] SAVE button to call up the Save display.

1 2

1TYPE

Among the various types of data created on this instrument, you can save all of them or data created in each mode to a single file. This parameter determines which specific type of data will be saved to a single file.

5 Press the [SF1] EXEC button.

The User Voice bank and number to be saved appear on the left half of the display. You can select the Voice including the desired audio signals.

1

1User Voice bank and number

Determines the User Voice bank and number which includes the audio signals you want to save as a WAV file or AIFF file.

6 Select the User Voice bank and number including the audio signals you want to save as a WAV file or AIFF file.

7 Press the [SF1] EXEC button to execute the Save operation.

Click mode Song mode Drum Kit mode Reference

Settings

AllData, Utility, Click, AllTrigger, AllKit, AllChain, AllSong, AllVoice, Wav, Aiff

mode

BFile name input location

You can enter a name of up to eight characters for the file you are about to save. For detailed instructions on naming, refer to “Basic Operation” on page 15.

2 Move the cursor to TYPE, then select “Wav” or “Aiff” by using the data dial, [INC/YES] and [DEC/NO] button.

3 Move the cursor to the file name input location, then input a file name.

For detailed instructions on naming, refer to “Basic Opera- tion” on page 15.

You can call up the Character List by pressing the [SF6] but- ton.

4 Select the destination directory for saving, if you have created any directory.

Pressing the [ENTER/STORE] button enters the selected directory (folder) while pressing the [EXIT] button returns to the next highest directory. When you want to save the file to the root directory and “root” is not shown as “Current Dir” at the right top of the display, press the [EXIT] button a few times to go to the root directory.

Sampling mode Chain mode Utility mode File mode Trigger

DTXTREME III Owner’s Manual

115