Yamaha III JDecay, IAttack, LFilter, KRelease, MQ (Resonance), The second page when the INPUT display is called up:

Reference

Drum Kit Mode [DRUM KIT]

The second page when the INPUT display is called up:

9 J K L M

The second page when the SOURCE display is called up:

9 J K L M

IAttack

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the attack time (from the moment a pad is hit until the moment the maximum initial level of the volume is reached) of each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the attack time of each selected Trigger Input Source.

Range -64 – +63

JDecay

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the decay time (indicating how fast the volume falls from maximum attack level) of each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the decay time of each selected Trigger Input Source.

Range -64 – +63

KRelease

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the release time of each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the release time of each selected Trigger Input Source.

Range -64 – +63

NOTE

•This parameter is available only when the RcvKeyOff parameter is set to “on.”

LFilter

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the cutoff frequency of the low pass filter for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the cutoff frequency of the low pass fil- ter for each selected Trigger Input Source.

Range -64 – +63

Low Pass Filter

Volume

Cutoff frequency

High sounds are muted.

Frequency (pitch)

These frequencies are “passed” by the filter.

MQ (Resonance)

When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the resonance of the low pass filter for each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the resonance of the low pass filter for each selected Trigger Input Source. You can use this parameter to add further character to the sound or change the sound in more dramatic ways.

Range -64 – +63

Level

Resonance

Frequency

Cutoff frequency

Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Drum Kit mode Reference

DTXTREME III Owner’s Manual 83