Yamaha III ■Rhythm Gate Results, 7 Stop playback, then confirm the result of the Rhythm Gate, For details on the Rhythm Gate display indications, see below

Quick Guide

Using the Groove Check Function

4 Move the cursor to the Trigger Input, then select the desired one.

When “ALL” is selected for any one of the lines, no other lines can be used.

5 Move the cursor to the EARLY or LATE column, then set the allowable range by using the [INC/YES], [DEC/NO] buttons and data dial.

According to the value set here, the Rhythm Gate range (crosshatch bar) becomes wider or narrower.

6 After the setup is completed, start the selected Song or Click sound, then play the drum pads along with playback.

The Rhythm Gate starts as soon as you hit the drum pad. The result for each hit (accuracy of the hit timing) is shown in the display in real time.

7 Stop playback, then confirm the result of the Rhythm Gate.For details on the Rhythm Gate display indications, see below.■Rhythm Gate Results

In the Rhythm Gate display, you can view the result of the check and see how accurate your timing is in real time. With the center line being correct timing, hits indicated at the left are early, and hits on the right are late. For details on each indication, see below.

Indicates the actual timing at which you hit the pad. The sound is produced only when this timing is within the bar graph.

This bar graph indicates the allowable range (the timing range within which sound is produced). This is different from the bar graph in the Groove Check display, indicates the timing range of all your actual hits.

Quick Guide

DTXTREME III Owner’s Manual 53