Reference

Utility Mode [UTILITY]

Pad Settings

[F2] PAD

 

 

mode Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Kit Drum Reference

Hi-Hat Settings

[SF1] HI HAT

1 2 3

1FootClosePosi (Foot Close Position)

Determines the amount of time it takes to detect a foot splash (from the start of a downward press to the opening of the hi- hat controller). The smaller the value, the more narrow the “virtual” open position is.

Range

-32 – +32

 

 

BFootSplashSens (Foot Splash Sensitivity)

Determines the length of time from the moment you apply a foot-splash performance to the Hi-Hat Controller to the moment the foot-splashed hi-hat sound is actually triggered. For larger values, you can play the foot-splashed sound more easily; however, slight movements of the pedal may trigger the sound inadvertently. It is a good idea to set this parameter to “off” if you do not play foot-splashes.

Range

off, 1 – 127

 

 

CSendHH

Determines whether or not the continuous change of the sound generated by opening/closing the Hi-Hit cymbal (by pressing/releasing the Hi-Hat Controller) is transmitted as MIDI messages via MIDI OUT.

Settings

off, on

 

 

Pad Function Settings

[SF2] PADFUNC

From this display, you can assign functions other than trig-

gering the drum sound to the pad (Trigger Input Source).

12

1SOURCE (Trigger Input source)

Determines the Trigger Input Source to which the specified function is assigned. When Input Lock (page 79) is turned off, you can select the Trigger Input Source also by hitting the corresponding section of the pad.

NOTE

•The Pad Function setting overcomes the Pad Song setting (page 93) if both of them are assigned to the same Trigger Input Source.

BPadFunc

Determines the function assigned to the Trigger Input Source specified above.

Settings

 

See below.

 

 

 

Off

No function is assigned. Normal operation.

inc kitNo.

Hitting the pad increases the Drum Kit num-

 

ber by 1.

dec kitNo.

Hitting the pad decreases the Drum Kit num-

 

ber by 1.

inc chain

Hitting the pad increases the Chain Step

 

number by 1.

dec chain

Hitting the pad decreases the Chain Step

 

number by 1.

inc tempo

Hitting the pad increases the value of the

 

tempo by 1.

dec tempo

Hitting the pad decreases the value of the

 

tempo by 1.

tap tempo

Hitting the pad three times sets the tempo

 

value even when the Tap display is not called

 

up.

clk on/off

Hitting the pad starts/stops Click playback.

Trigger Bypass Settings

[SF3] TRGBYPS

1

1TrigBypass

When this parameter is set to on, the DTXTREME III will not accept any Trigger Signals coming from all Trigger Input Sources. This parameter is useful when you want to cancel all Trigger Signals temporarily in order to change the pad connection setup. This parameter should be set to off normally.

Settings

off, on

 

 

Settings

Refer to the Trigger Input Source List on page 61.

126

DTXTREME III Owner’s Manual