Yamaha III Basic Procedure of the Sampling Jobs, [F4] JOB, 09: Name, 10: Copy, 08: Slice, 11: Delete, 13: Extract, 01: Normalize, 07: Loop-Remix, 12: Delete All

ク

イ

ッ

ク

ガ

イ

ド

Drum Reference

Reference

Sampling Mode [SAMPLING]

Sampling Jobs [F4] JOB

The Sampling Job lets you process and modify User Voices you have recorded. 14 Sampling Jobs are available.

01: Normalize	06: Stereo to Mono	11: Delete
02: Time-Stretch	07: Loop-Remix	12: Delete All
03: Convert Pitch	08: Slice	13: Extract
04: Fade In/Out	09: Name	14: Optimize Memory
05: Convert Freq	10: Copy

mode Sampling mode Chain mode Utility mode File mode Trigger mode Click mode Song mode Kit

Basic Procedure of the Sampling Jobs

1 From the [F1] SELECT display, select the User Voice to which the Job is applied.

2 Press the [F4] JOB button.

3 Move the cursor to the desired Job by using the data dial, [INC/DEC] and [DEC/ NO] buttons or Cursor up/down buttons, then press the [ENTER/STORE] button.

The selected Job display appears.

Press the [EXIT] button to go back to the Job menu display.

NOTE

•When the User Voice contains no audio data, pressing the [ENTER/ STORE] button cannot call up the Job display, depending on the selected Job.

4 Move the cursor to the desired parameter, then set the value by using the data dial, [INC/YES] and [DEC/NO] buttons.

5 Press the [ENTER/STORE] button to execute the Job.

If “Are you sure?” appears, go to Step 6. If not, go to step 7.

NOTE

•When executing the “08: Slice” Job, you will need to set additional

parameters: Select and Save To. Set these parameters, press the [ENTER/STORE] button, then press the [INC/YES] button to assign the sliced audio data to the specified User Voice. Repeat this proce- dure as desired (depending on the Subdivide setting) then go to Step 9.

6 Press the [INC/YES] button.

To cancel the Job, press the [DEC/NO] button then go back to step 4.

7 Press the [SF1] AUDITION button to hear the modified sound.

At this time, the User Voice has been modified temporarily and is not fixed as data.

8 Press the [F6] OK button if you are satis- fied with the result of the Job operation.

If you are not satisfied with the result of the Job operation, press the [F5] CANCEL button and go back to Step 4.

CAUTION

•You cannot return the modified User Voice to the original after fix- ing the Job result. Important data should always be saved to a USB storage device connected to the USB TO DEVICE terminal (pages 55 and 114).

9 Save the created User Voice data to a USB storage device.

For detailed instructions on saving, see pages 55 and 114.

CAUTION

•The recorded audio data resides temporarily in DIMM (pages 76 and 147). Any data in DIMM will be lost when turning the power off. You should always save any data residing in DIMM to a USB storage device before turning off the power.

142 DTXTREME III Owner’s Manual