Yamaha Yamaha Robot Controller CC-Link Unit, RCX Series Noise measures, Mounting the ferrite core

4. Noise measures

Two ferrite cores must be mounted on the input power cable when connecting to the CC-Link system.

4.1Mounting the ferrite core

Mount two ferrite cores onto the input power cable connected to the input power connec- tor on the front panel of the robot controller.

[Procedures]

1.Mount the two ferrite cores (supplied) onto the input power cable. The ferrite core should be placed as close to the robot controller body as possible.

w WARNING

Completely shut off the power 2. Fix the mounted ferrite core with an Insulock tie, etc. supply to the input power cable

before starting this work.

c CAUTION

Securely fix the ferrite core. If the ferrite core is not mounted, trouble could occur with the CC-Link system operations.

2

Connection

2-5