Yamaha RCX Series Parameter setting for CC-Link serial I/O board, Type Display Meaning

2

Connection

6.Parameter setting for CC-Link serial I/O board

6.1Parameter setting for CC-Link serial I/O board

1)	Press the	F 1	(PARAM) key in “SYSTEM” mode to enter “SYSTEM>PARAM”
	mode.
2)	Press the	F 5	(OP. BRD) key in “SYSTEM>PARAM” mode to enter the option

board parameter setting mode.

The option boards installed in the controller are displayed in order on the MPB screen.

Fig. 2-6-1

SYSTEM>PARAM>OP.BRDV8.18

1.DIO_N(1) VALID

2. ---

3.CCLnk(S1/10M)VALID

4. ---

SELECT

Option boards installed into the option slots are displayed on the MPB screen.

Type	Display	Meaning
	DIO_N(n)	An option DIO board of NPN specifications is installed. The
		number in parentheses is an ID number.
Option DIO
	DIO_P(n)	An option DIO board of PNP specifications is installed. The
		number in parentheses is an ID number.
	CCLnk(n/m)	A CC-Link unit is installed. Letters in parentheses indicate a station
		number "n" and a communication speed "m".
Serial I/O	D_Net(n/m)	A DeviceNet unit is installed. Letters in parentheses indicate a
		MAC ID number "n" and communication speed "m".
	Profi(n/m)	A ProfiBUS unit is installed. Letters in parentheses indicate a
		Station address "n" and communication speed "m".
Network	E_Net	An Ethernet unit is installed.

3) In “SYSTEM>PARAM>OP. BRD” mode, select the “CCLnk” with the cursor (↑/↓) keys and press the F 1 (SELECT) key.

Fig. 2-6-2

SYSTEM>PARAM>OP.BRD>SELECT V8.18

	1.board condition		VALID
	2.remote cmd / IO cmd(SI05)		VALID
	3.Output MSG to SOW(1)		INVALID
EDIT		JUMP

2-8