1
10Base-T hub, 2-3 10Base-T network, 2-3
A
Acronyms and Abbreviations, M Action Matched, 6-9, 6-12 Action Not Matched, 6-9, 6-12 Active, 6-8, 6-12
Ambient temperature, L Ascend, 1-2
AT command, 11-1 Authentication protocol, 4-2 Average Line Utilization, 10-3
B
Backup, 11-2
Binary mode, 11-7
Bit-wise ANDing, 6-11
C
Call Detail Record, 10-7 Call Direction, 4-2 Call filtering, 6-1 CHAP, 1-1, 4-2, 8-1 CISCO PPP, 4-3 Client, 2-9
Client IP, 3-5 Client router, 2-9 COM port, 2-3
Command interpreter (CI), 11-5 Command Interpreter Mode, 11-8 Command Mode, 10-8 Compression, 4-3
Computer, 2-2 Connection diagram, 2-1 Console Port, 10-4, 10-5, 12-1
Index
Contact Person’s Name, 2-8
Corrective Action, 12-1
Country Code, 10-5
CPU Load, 10-3
Crossover cable, 2-3
Current Line Utilization, 10-3
Customer Support, vii
D
Data bits, 12-1
Data Compression, 1-1 Data filtering, 6-1 Destination
IP Mask, 6-8
Port #, 6-8
Port # Comp, 6-9 Destination Address, 6-7 Destination IP Address, 6-8 Destination Port number, 6-7
DHCP (Dynamic Host Configuration Protocol), 1- 1, 3-1, 3-3
Diagnostic, 10-8 DNS, 3-3, 3-5 Domain Name, 3-3, C Download, 11-2
E
Echo, 3-7 Encapsulation, 4-3 Error Log, 10-6 Error packets, 10-3 Ethernet Address, 10-5 Ethernet cable, 2-2, 12-2 Ethernet Hub, 1-2 Ethernet LAN, 2-1 Ethernet Setup, 2-10, 3-4 Ethernet traffic, 2-10, 6-16
Examples of Error and Information Messages, 10- 6