ZyXEL Communications Prestige 100L Internet Access Setup, LAN TCP/IP Setup Menu Fields, RIP-1

Prestige 100L IDSL Router

Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.

	Table 3-2	LAN TCP/IP Setup Menu Fields
FIELD		DESCRIPTION	EXAMPLE
IP Address	Enter the IP address of your Prestige in dotted decimal notation.		192.168.1.1
			(default)
IP Subnet Mask	Your Prestige automatically calculates the subnet mask based on		255.255.255.0
	the IP address that you assign. Unless you are implementing
	subnetting, use the subnet mask computed by the Prestige.
RIP Direction	Press [space bar] to select the RIP direction from Both/In		Both
	Only/Out Only/None.		(default)
Version	Press [space bar] to select the RIP version from RIP-1 /RIP-2B /		RIP-1
	RIP-2M.		(default)

When you have completed this menu, press the [Enter] key at the prompt [Press ENTER to Confirm . . .] to save your configuration, or press the [Esc] key at any time to cancel.

3.3Internet Access Setup

The following steps describe the set-up procedure to configure your Prestige for Internet access.

SUA

Menu 4 - Internet Access Setup

ISP's Name =

My Login =

My Password =

Single User Account = Yes

IP Address = 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Figure 3-3 Menu 4 – Internet Access Setup

Internet Access 3-7