Prestige 100L IDSL Router
NOTE: If you upload the firmware to the Prestige, it reboots automatically when the
file transfer is completed (the SYS LED flashes).
Note that the telnet connection must be active and the SMT in CI mode before and during the TFTP transfer. For details on TFTP commands (see following example), please consult the documentation of your TFTP client program. For UNIX, use get to transfer from the Prestige to the workstation, put the other way around, and binary to set binary transfer mode.
11.5.1 Using the FTP Command From the DOS Prompt
Step 1. Launch the FTP client on your workstation. Step 2. Type open and the IP address of your Prestige.
Step 3. You may press the [Enter] key when prompted for a username.
Step 4. Type root and your SMT password as requested. The default is 1234. Step 5. Type bin to set transfer mode to binary.
Step 6. Use put to transfer files from the workstation to the Prestige, e.g., put p100l.bin ras transfers the firmware on your computer (p100l.bin) to the Prestige and renames it “ras”. Similarly put p100l.rom rom transfers the configuration file on your computer (p100l.rom) to the Prestige and renames it “rom”.
Step 7. Type quit to exit the ftp prompt.
Menu 24.7.2 - System Maintenance - Upload Router Configuration File
To upload router configuration file:
1.Enter "y" at the prompt below to go into debug mode.
2.Enter "atur3" after "Enter Debug Mode" message.
3.Wait for "Starting XMODEM upload" message before activating Xmodem upload on your terminal.
4.After successful firmware upload, enter "atgo" to restart the router.
Warning:
1.Proceeding with the upload will erase the current configuration file.
2.The router's console port speed (Menu 24.2.2) may change when it is restarted; please adjust your terminal's speed accordingly. The password may change (menu 23), also.
3.When uploading the DEFAULT configuration file, the console port speed will be reset to 9600 bps and the password to "1234".
Do You Wish To Proceed:(Y/N)
Figure 11-6 FTP Session Example
Transferring Files |
