Prestige 100L IDSL Router

The following table describes the fields present in Menu 24.1 – System Maintenance – Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

Table 10-1 System Maintenance – Status Menu Fields

FIELD

DESCRIPTION

Chan

Shows the statistics for logical channels.

 

 

 

Link

Shows the Remote Node the channel is currently connected to or the

 

 

status of the channel (Idle, Calling, or Answering).

 

 

Type

Shows the current connecting speed (64K or 128K).

 

 

 

TXPkts

Shows the number of transmitted packets on this channel.

 

 

 

RXPkts

Shows the number of received packets on this channel.

 

 

 

Errors

Shows the number of error packets on this channel.

 

 

 

CLU (Current Line Utilization)

Shows the percentage of current bandwidth used on this channel.

 

 

 

ALU (Average Line

Shows the average CLU for this channel.

Utilization)

 

Up Time

Shows the time this channel has been connected to the current Remote

 

 

Node.

 

 

Total Up Time

Shows the total time this channel has been connected to the current

 

 

Remote Node.

 

 

CPU Load

Specifies the percentage of CPU utilization.

 

 

Ethernet

Shows the current status of the LAN connection on your Prestige.

 

 

Status

Shows the current status of the LAN that is 10M/Half Duplex. Left hand

 

side of the “/” is the speed of the Ethernet and the right hand side is the

 

mode of the Ethernet.

 

 

TX Pkts

Shows the number of transmitted packets to LAN.

 

 

 

RX Pkts

Shows the number of received packets from LAN.

 

 

 

Collisions

Shows the number of collisions.

 

 

WAN

 

 

 

IP Address

Shows the IP address of the current channel.

 

 

System Information

10-3

Page 86
Image 86
ZyXEL Communications Prestige 100L manual System Maintenance Status Menu Fields, Field Description