ZyXEL Communications Prestige 100L manual TCP/IP Filter Rule Menu Fields, Field Description Option

Prestige 100L IDSL Router

Menu 21.1.1 - TCP/IP Filter Rule

Filter #: 1,1

Filter Type= TCP/IP Filter Rule

Active= Yes
IP Protocol= 6	IP Source Route= No

Destination: IP Addr= 0.0.0.0

IP Mask= 0.0.0.0

Port #= 137

Port # Comp= Equal

Source: IP Addr= 0.0.0.0

	IP Mask= 0.0.0.0
	Port #=
	Port # Comp= None
TCP Estab= No
More= No	Log= None

Action Matched= Drop

Action Not Matched= Check Next Rule

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 6-3 Menu 21.1.1 – TCP/IP Filter Rule

The following table describes how to configure your TCP/IP filter rule.

	Table 6-4	TCP/IP Filter Rule Menu Fields
FIELD		DESCRIPTION	OPTION
Active	This field activates/deactivates the filter rule.		Yes/No
IP Protocol	Protocol refers to the upper layer protocol, e.g., TCP is 6,		0 to 255
	UDP is 17 and ICMP is 1. This value must be between 0
	and 255.
IP Source Route	If Yes, the rule applies to packet with IP source route		Yes/No
	option; else the packet must not have source route option.
	The majority of IP packets do not have source route.
Destination: IP	Enter the destination IP Address of the packet you wish to		IP address
Address	filter. This field is disregarded if it has a 0.0.0.0 value.
Destination: IP	Enter the IP mask to apply to the Destination: IP Addr.		IP address
Mask
Destination: Port #	Enter the destination port of the packets that you wish to		0 to 65535
	filter. The range of this field is 0 to 65535. This field is
	disregarded if it has a 0 value.

6-8 Filters