Prestige 100L IDSL Router
Menu 3 – Ethernet Setup
1.General Setup
2.TCP/IP and DHCP Setup
Enter Menu Selection Number:
Figure 2-9 Menu 3 – Ethernet Setup
2.9.1 General Setup
This menu allows you to specify the filter sets you wish to implement on your Ethernet traffic. From Menu 3 – Ethernet Setup, enter 1 to go to Menu 3.1 – General Ethernet Setup.
Menu 3.1 – General Ethernet Setup
Input Filter Sets: protocol filters= device filters=
Output Filter Sets: protocol filters= device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 2-10 Menu 3.1 – General Ethernet Setup
NOTE: You may apply up to four filter sets separated by commas.
Input and Output Filter Sets
Filter sets are used to block certain packets to reduce traffic and to prevent a security breach. Filtering is a very involved subject, so leave these fields blank for the time being. After you have studied filtering in Chapter 6, come back and define the filter sets. Menu 3.2 is discussed in the next part of the manual. Please read on.
Hardware Installation and Initial Setup |
