Prestige 100L IDSL Router
The following table describes the fields in the Generic Filter Rule Menu. |
| ||
| Table | Generic Filter Rule Menu Fields |
|
|
|
|
|
FIELD |
| DESCRIPTION | OPTION |
|
|
| |
Filter # | This is the filter set, filter rule coordinates, i.e., 2,3 refers to the second filter |
| |
| set and the third rule of that set. |
| |
|
|
| |
Filter Type | Use [space bar] to toggle between both types of rules. Parameters | Generic Filter | |
| displayed below each type are different. | Rule / TCP/IP | |
|
|
| Filter Rule |
|
|
| |
Active | Select Yes to turn on the filter rule. | Yes/No | |
|
|
| |
Offset | Enter the starting byte of the data portion in the packet that you wish to | Default = 0 | |
| compare. The range for this field is from 0 to 255. |
| |
|
|
| |
Length | Enter the byte count of the data portion in the packet that you wish to | Default = 0 | |
| compare. The range for this field is 0 to 8. |
| |
|
|
| |
Mask | Enter the mask (in Hexadecimal) to apply to the data portion before |
| |
| comparison. |
|
|
|
|
| |
Value | Enter the value (in Hexadecimal) to compare with the data portion. |
| |
|
|
| |
More | If Yes, a matching packet is passed to the next filter rule before an action is | Yes/No | |
| taken; else the packet is disposed of according to the action fields. |
| |
| If More is Yes, then Action Matched and Action Not Matched are N/A. |
| |
|
|
| |
Log | Select the logging option from the following: | None | |
| • None – No packet is logged. | Action | |
| • Action Matched – Only packets that match the rule parameters are | Matched | |
| logged. |
| Action Not |
| • Action Not Matched – Only packets that do not match the rule | ||
| Matched | ||
| parameters are logged. |
| |
|
|
| |
| • Both – All packets are logged. | Both | |
Action | Select the action for a matching packet. | Check Next | |
Matched |
|
| Rule |
|
|
| Forward |
|
|
| Drop |
Action Not | Select the action for a packet not matching the rule. | Check Next | |
Matched |
|
| Rule |
|
|
| Forward |
|
|
| Drop |
Once you have completed filling in Menu 21.4.1.1 – Generic Filter Rule, press the [Enter] key at the | |||
message [Press Enter to Confirm] to save your configuration, or press the [Esc] key to cancel. This data is | |||
now displayed on Menu 21.1.1 – Filter Rules Summary. |
| ||
|
|
|
|
Filters |
