Kawasaki 80C152, KS152JB, 80C51 technical specifications Smod ARB REQ Garen Xrclk Gfien IDL

Page 106

KS152JB Universal Communications Controller Technical Specifications

MYSLOT.7 (DCJ) - Determines the type of Jam used during CSMA/CD operation when a collision occurs. If set to a 1 then a low D.C level is used as the jam signal. If cleared, then CRC is used as the jam signal. The jam is applied for a length of time equal to the CRC length.

NOACK - No Acknowledgment error bit, see TSTAT.

NRZI - Non-Return to Zero Inverted, a type of data encoding where a 0 is represented by a change in the level of the serial link. A 1 is represented by no change.

OVR - Overrun Error bit, see RSTAT.

PR - Protocol select bit, see GMOD.

			PCON (87H)
7	6	5	4	3	2	1	0
SMOD	ARB	REQ	GAREN	XRCLK	GFIEN	PD	IDL

PCON.0 (IDL) - Idle bit, used to place the C152 into the idle power saving mode.

PCON.1 (PD) - Power Down bit, used to place the C152 into the power down power saving mode.

PCON.2 (GFIEN) - GSC Flag Idle Enable bit, when set, enables idle ﬂags (01111110) to be gen- erated between transmitted frames in SDLC mode.

PCON.3 (XRCLK) - External Receive Clock bit, used to enable an external clock to be used for only the receiver portion of the GSC.

PCON.4 (GAREN) - GSC Auxiliary Receive Enable bit, used to enable the GSC to receive back- to-back SDLC frames. This bit has no effect in CSMA/CD mode.

PCON.5 (REQ) - Requester mode bit, set to a 1 when C152 is to be operated as the requester station during DMA transfers.

PCON.6 (ARB) - Arbiter mode bit, set to a 1 when C152 is to be operated as the arbiter during DMA transfers.

PCON.7 (SMOD) - LSC mode bit, used to double the baud rate on the LSC.

PDMA0 - Priority bit for DMA Channel 0 interrupt, see IPN1.

PDMA1 - Priority bit for DMA Channel 1 interrupt, see IPN1.

PGSRE - Priority bit for GSC Receive Error interrupt, see IPN1.

Kawasaki LSI USA, Inc.

Page 106 of 120

Ver. 0.9 KS152JB2

Image 106

Contents Introduction Technical Specifications Name Description Port Pin DescriptionPIN Description Pin Name Alternate FunctionXTAL2 XTAL1RST Eben ALEPsen EpsenSpecial function Registers SFR map for the cpuReset Timing Reset Values of the SFRs Sbuf Indeterminate Tmod ConfigurationsScon PconPort 0 I/O Pad Port 2 I/O Pad Port bit I/O PadsPorts 4,5 Comments ProgramPsen Epsen Fetch viaTIMER/COUNTERS Tmod Timer/Counter Mode Control RegisterTcon Timer/Counter Control Register ModeTimer/Counter in Mode IE Interrupt Enable Register Timer/Counter 0 in ModeInterrupts Priority Level Structure Egste EDMA1 Egstv EDMA0 Egsre Egsrv Pgste PDMA1 Pgstv PDMA0 Pgsre PgsrvPgsrv PX0EX0 Egsrv 2BHPT1 PDMA1EDMA1 ET1 1BHKawasaki LSI USA, Inc Ver .9 KS152JB2 Status of the External Pins during Idle and Power Down Power Down and IdleALE Psen Pcon Power Control Register Smod IDLLocal Serial Channel Local Serial Port Mode ControllerSerial Port Mode Mode Load Sbuf Baud Rates Smod Timer 1 generated commonly used Baud ratesMHZ JNB SINGLE-STEP OperationReti Kawasaki LSI USA Inc Global Serial Channel Introduction11/IDLE CRC None DC JAM CRCCsma Sdlc 11/IDLEExternal clock Internal clock Control cpu Control dma Raw Receive Raw Transmit CSMA/CD Frame Format CSMA/CD OverviewPreamble BOF Address Info CRC EOF Kawasaki LSI USA, Inc Ver .9 KS152JB2 23 24 Interframe Space Collision Detection CSMA/CD Data EncodingManchester Encoding BIT Time Jitter ToleranceMissing 0-to-1 Transition Narrow PulsesUnexpected 1-to-0 Transition Response to a Detected Collision What the GSC was doing Resolution of CollisionsGSC Inactive TfifoDCR BackoffAlgorithm Prbs Tcdcnt Load Bkoff Slot Clock Myslot Random BackoffBKOFF= Myslot Deterministic Backoff Hardware Based Acknowledge Kawasaki LSI USA, Inc Ver .9 KS152JB2 Sdlc Frame Format BOF Address Control Info CRC EOFKawasaki LSI USA, Inc Ver .9 KS152JB2 Nrzi BIT Time Data EncodingBIT STUFFING/STRIPPING Line Idle Sending Abort CharacterAcknowledgement Multi-Drop Network PRIMARY/SECONDARY StationsPoint-to-point Network Ring NetworkSdlc Hdlc Using a Preamble in SdlcHDLC/SDLC Comparison User Deﬁned ProtocolsLine Discipline Planning for Network Changes and ExpansionsDMA Servicing of GSC Channels Kawasaki LSI USA, Inc Ver .9 KS152JB2 Baud Rate Initialization Test Modes External Driver InterfaceJitter Receive BIT Time Received Local Value Manchester Encoding BIT TimeReceive Sampling Rate Received Transmit WaveformsReceiver Clock Recovery CSMA/CD Clock RecoveryRcbat Crce Determining Receiver ErrorsExternal Clocking AddressingDetermining Line Discipline 2 CPU/DMA Control of the GSCCollisions and Backoff What the GSC was doing Response GSC Register Descriptions Successful Ending of Transmissions and ReceptionsGMOD84H Xtclk PL1 PL0 PL1 PL0 Length BitsKawasaki LSI USA, Inc Ver .9 KS152JB2 DCJ DCR SA5 SA4 SA3 SA2 SA1 SA0 ARB REQ Garen Xrclk Gfien IDLRcabt Crce RDN Rfne Gren Haben Kawasaki LSI USA, Inc Ver .9 KS152JB2 LNI Noack Tcdt TDN Tfnf TEN DMA Kawasaki LSI USA, Inc Ver .9 KS152JB2 DMA Operation DMA with the 80C152DMA Registers DAS IDA Alternate Cycle ModeBurst Mode SAS ISASerial Port Demand Mode External Demand ModePCH P2 SFR DMA Cycle Resume Program Execution Timing Diagrams12 OSC.PERIODS ALE Psen P1 Inst Float DMA Transfer from Internal Memory to Internal MemoryDMA Cycle 12 OSC. Periods Resume Program Execution ALE Psen 12 OSC. Periods ALE Psen Inst DMA Data OUT PCL Inst PCHDMA Cycle Resume Program Execution Arbiter Mode Request ModeHold/Hold Acknowledge Using the HOLD/HLDA Acknowledge ARB REQInternal Logic of the Arbiter ALE ARB If Hlda = ALE AEQ ALE REQDmxrq Internal Logic of the Requester DMA Arbitration Kawasaki LSI USA, Inc.oup, Inc Ver .9 KS152JB2 Kawasaki LSI USA, Inc Ver .9 KS152JB2 Kawasaki LSI USA, Inc Ver .9 KS152JB2 DMA Arbitration with Hold/Hold Ack Summary of DMA Control Bits DAS IDA SAS ISA DoneInterrupt Structure IE0 TI+RI ET1 EX1 ET0 EX0PT1 PX1 PT0 PX0 IPN1GSC Transmitter Error Conditions Transmit Error Flags Logic for Clearing TEN, Setting TDNGSC Receiver Error Conditions Glossary Kawasaki LSI USA, Inc Ver .9 KS152JB2 DCON0/1 092H,093H Xtclk PL1 PL0 Kawasaki LSI USA, Inc 102 Ver .9 KS152JB2 Kawasaki LSI USA, Inc 103 Ver .9 KS152JB2 PT1 PX1 PT0 EX0 Myslot 0F5H DCJ DCR SA5 SA4 SA3 SA2 SA1 SA0 Smod ARB REQ Garen Xrclk Gfien IDL OVR Rcabt Crce RDN Rfne Gren Haben Kawasaki LSI USA, Inc 108 Ver .9 KS152JB2 SM0 SM1 SM2 REN TB8 RB8 TF1 TR1 TF0 TR0 IE1 IT1 IE0 IT0Gate Kawasaki LSI USA, Inc 111 Ver .9 KS152JB2 Data Pointer LOW PortStack Pointer DPL.7 DPL.6 DPL5 DPL.4 DPL.3 DPL.2 DPL.1 DPL.0DPH.7 DPH.6 DPH.5 DPH.4 DPH.3 DPH.2 DPH.1 DPH.0 Timer ControlData Pointer High DPHTimer 0 LSB Timer Mode ControlGate Timer Timer 1 LSBTimer 0 MSB Timer 1 MSBSerial Data Buffer Serial Port ControlSM0 SBUF.7Program Status Word RS1 RS0Accumulator ACC.7 ACC.6 ACC.5 ACC.4 ACC.3 ACC.2 ACC.1 ACC.0Kawasaki LSI USA, Inc 119 Ver .9 KS152JB2 Kawasaki LSI USA, Inc 120 Ver .9 KS152JB2