Overview
Navigating through screens
To open any screen, press the Up or Down arrow until the selector ( rests next to your desired selection. Press ENTER to view the selected screen.
|
|
|
|
|
| Stats | |
|
| ATS/Voltage | Alarms |
|
| Generator | Config |
|
| Testing | Help |
|
|
|
|
Contacts In: 02of04
Name: User Switch #2
Normal:
Open
Open
When configuring settings, press the Up or Down arrows until the selector ( rests next to the setting you want to change, and then press ENTER. If the setting is a list of choices, an input arrow ( will appear next to the setting. Press the Up or Down arrow until your desired change appears. Press ENTER to select the setting.
Contacts In: 02of04
Name: User Switch #2
Normal:
Open
Status: Open
On some screens, continue arrows ( indicate there are additional screens to view in the category. Press the Up or Down arrow to view these additional screens.
System/Network
Electrical Configuration
Panel Configuration
Manufacturer Data
Product Data
Factory Defaults
Firmware Updates
Password-protected screens
When configuring or changing settings, the display interface prompts you for your password. To enter your password:
1. Press the Up or Down arrow until the correct letter is
displayed, and then press ENTER.Enter Password:
Note
After pressing ENTER, the character you entered is displayed as an asterisk and the input arrow moves to the next space. Select the next password character and then ENTER, etc.
*******
2. Press ENTER twice after entering your password.
See “System Password” on page 45 to change your password.
InfraStruXure Power Generation System | 31 |