Xilinx specifications Features, PLB PCI Full Bridge v1.00a

Page 2

PLB PCI Full Bridge (v1.00a)

Features

•Independent PLB and PCI clocks

•33 MHz, 32-bit PCI bus support

•Utilizes two pairs of FIFOs to exploit the separate master and slave PLB IPIF modules.

•Includes a master IP module for remote PCI initiator transactions, which follows the protocol for interfacing with the master IPIF module utilizing Xilinx LocalLink protocol. The PLB PCI Bridge translates the PCI initiator request to PLB IPIF master transactions.

•Includes a slave IP module for remote PLB master transactions, which follows the protocol for interfacing with the slave IPIF module utilizing Xilinx IPIC protocol. The PLB PCI Bridge translates the PLB master request to PCI initiator transactions. The SRAM-like interface is utilized at the IPIC interface for data transfers.

•The PLB IPIF slave attachment has a timer that limits the time for both read and write dataphase operations to complete. When the timer expires, Sl MErr signal is asserted. See PLB IPIF Product Specification for details.

•Full bridge functionality

-PLB Master read and write of a remote PCI target (both single and burst)

-PCI Initiator read and write to a remote PLB slave (both single and multiple).

-I/O read and I/O write commands are supported only for PLB master read and writes of PCI I/O space as designated by its associated memory designator parameter. All memory space on the PLB-side is designated as memory space in the PCI sense, therefore, I/O commands cannot be used to access memory on the PLB-side.

-Configuration read and writes are supported (including self-configuration transactions) only when upper word address lines are utilized for IDSEL lines. The Configuration Read and Write commands are automatically executed by writing to the Configuration Data Port Register. Data in the Configuration Address Port Register and the Configuration Bus Number/Subordinate Bus Number Register are used in execution of the configuration transaction per PCI 2.2 specification.

•PCI Memory Read Line (MRL) command is supported in which the v3.0 core is a target. MRL is aliased to a Memory Read command which has a single data phase on the PCI.

•PCI Memory Write Invalidate (MWI) command is supported in which the v3.0 core is a target. The v3.0 core does not support this command when it is an initiator. MWI is aliased to a Memory Write command which has a single data phase on the PCI.

•Supports up to 6 PLB devices, in the sense defined by independent parameters and unique PLB memory space for each device

-Each device has the following parameters: PLB BAR, high (upper) address, memory designator, and translation for mapping PLB address space to PCI address space. Byte addressing integrity is maintained by default in all transfers. Address translation is performed by high-order bit substitution. High-order bit definition can be done with parameters or dynamically via registers.

•Supports up to 3 PCI devices (or BARs in PCI context) with unique memory PCI memory space. The v3.0 core supports up to 3 PCI BAR.

-Each device has the following parameters: PCI BAR, length, memory designator, and translation for mapping PCI address space to PLB address space. Byte addressing integrity is maintained by

2

www.xilinx.com

DS508 March 21, 2006

 

 

Product Specification

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Introduction LogiCORE FactsFeatures PLB PCI Full Bridge v1.00aPLB PCI Full Bridge v1.00a Functional Description System ResetEvaluation Version LogiCore Version 3.0 32-bit PCI Core RequirementsBus Interface Parameters Address TranslationExample Cpcibar LEN 1=25 Type Generic Feature Parameter Allowable Values DefaultDescription Name HIGHADDR3 TYPE2CIPIFBAR3 Cincludebaroff PCIBAR3 CplbawidthIPIFBAR0 Cplbawidth CPCIBAR2BAR LEN0Wrburst PCI2IPIF FifoCtrigipif DEPTH-3. PCI2IPIF Occlevel 2CPCI2IPIFFIFOAConfiguration V3.0 Core Parameters GroupIpif Parameters Group PLB PCI Bridge I/O Signals PLB PCI Bus Interface I/O SignalsPort Signal Name Interface Description System SignalsPort Signal Name Interface Description Port Signal Name User Asserted PCI Interrupt Signal CIPIFBARHIGHADDR0 CipifbarnumIpif BAR CIPIFBAR2PCIBAR0PLB PCI Bridge Parameters-Port Dependencies Contd Generic CPCIBARLEN0 CpcibarnumCPCIBAR2IPIFBAR0 CPCIBAR2IPIFBAR1V3.0 Core Parameters Group Supported PCI Bus Commands Supported PCI Bus CommandsCommand PLB PCI Bridge Code NamePLB PCI Bus Interface Registers Register Name PLB Address AccessPLB PCI Bridge Register Descriptions Baseaddr +Register and Parameter Dependencies PLB PCI Bridge Interrupt Registers DescriptionsPLB Master Burst Write Retry Disconnect- Interrupt23 Bits Name Access Reset DescriptionPLB Master Burst Write Retry Timeout- Interrupt22 PLB Master Burst Write Retry Timeout Enable- Enables PCI Initiator Write Serr Enable- Enables this interrupt toPCI Initiator Read Serr Enable- Enables this interrupt to PLB Master Write Master Abort- Interrupt25 indicatesPLB PCI Bridge Reset Register Description Bus Number/Subordinate Bus Number Register Description Configuration Address Port Register DescriptionConfiguration Data Port Register Description IPIFBAR2PCIBARN High-Order Bits Register Description CincludebaroffsetregCIPIFSPACETYPE0=1 Host Bridge Device Number Register Description Host Bridge Device Number Bit assignment assumes 32-bit busTransaction PLB PCI TransactionsRemote PLB Master PCI I/O Space PCI Memory Space Non-prefetchableTranslation Table for PCI commands to PLB transactions PLB Master Initiates a Read Request of a PCI target Abnormal Terminations PLB PCI Full Bridge v1.00a PLB Master Initiates a Write Request to a PCI Target PerrPLB PCI Full Bridge v1.00a Abnormal Terminations Write Perr interrupt asserted PCI Initiator Initiates a Read Request of a PLB Slave PLB PCI Full Bridge v1.00a Abnormal Terminations Serr PCI Initiator Initiates a Write Request to a PLB SlaveAbnormal condition Memory Read Memory Read Multiple Abnormal Terminations Configuration Transactions Abnormal condition Memory WriteConfiguration Space Header 0x00 0xFF 0x01 PLB PCI Full Bridge v1.00a Design Implementation Design ToolsDesign Debug Design ContraintsNET PCI AD* IOSTANDARD=PCI33 NET PCI CBE* IOSTANDARD=PCI33 Timegrp PCI Pads D OFFSET=IN Target Technology Virtex-4 SupportPLB PCI Full Bridge v1.00a Parameter CIDELAYCTRLLOC=IDELAYCTRLX2Y5-IDELAYCTRLX2Y6 BRAM# GCLK# Device Utilization and Performance BenchmarksParameter Values Device Resources Date Version Revision Reference DocumentsRevision History
Top Page Image Contents