![](/images/new-backgrounds/1156698/156698143x1.webp)
11. Help
11.3.6 Copying
Problem | Cause & Solution | ||
The unit will not make a copy. | L The ink film is empty. Replace the ink film with a new one (page 14). | ||
|
|
| L You cannot make a copy during programming. |
|
|
| L You cannot make a copy during a telephone conversation. |
|
|
|
|
A black line, white line or | L The scanner glass or rollers are dirty with correction fluid, etc. Clean them | ||
smudge appears on the | (page 76). Please do not insert a document before correction fluid has dried | ||
copied document. | completely. | ||
|
|
|
|
The copied image is | L Adjust the width of the document guides to fit the actual size of the | ||
distorted. | document. | ||
|
|
|
|
The printing quality is poor. | Please do not reuse the ink film! | ||
| Original | Please use genuine Panasonic replacement film. Refer to page 9 for further | |
| details. | ||
|
|
| |
|
|
| L The thermal head is dirty. Clean it (page 77). |
| ABC |
| L Some paper has instructions recommending which side to print on. Try |
|
|
| turning the recording paper over. |
|
|
| |
| Copy | L You may have used paper with a cotton and/or fibre content that is over | |
| 20%, such as letterhead or resume paper. | ||
|
|
|
Documents or recording paper frequently misfeed.
LClean the document feeder rollers, recording paper feeder and rubber flap (page 76).
11.3.7 Answering machine
Problem | Cause & Solution |
I cannot listen to messages | L Activate the remote operation feature by setting the remote operation ID |
from a remote location. | beforehand (page 48, feature #11 on page 51). Press the remote operation |
| ID correctly and firmly. |
| L The unit is not in TAM/FAX mode. Change to TAM/FAX mode (page 49). |
|
|
The other party complains | L The recording time is set to “GREETING ONLY”. Select “1 MINUTE” or “3 |
that they cannot leave a voice | MINUTES” (page 48, feature #10 on page 51). |
message. | L The memory is full. Erase unnecessary messages (page 46, 47). |
| L Make sure there is no other answering machine connected on the same |
| line. |
|
|
I cannot operate the | L Someone is operating the answering machine. |
answering machine with the | L You are too far from the base unit. Move closer to the base unit. |
cordless handset. |
|
|
|
The message indicator | L This is normal. New messages have been recorded. Listen to the new |
flashes slowly. | messages (page 46) or turn the message alert OFF (page 56). |
|
|
Caller ID information does not | L The caller information will not be displayed if a message is recorded by |
display during message | using {MEMO} (page 46). |
playback. |
|
|
|
72