5Gently pull the smaller spool towards you and place it in its housing - there are two slots that hold it in place close, the rear cover.
Replacing the smart card
The smartcard enables screen display, after printout, of remaining ink ribbon.
1
1With the front cover open, locate the green smartcard support (1).
2Press the smartcard support downwards to unlock it. This will open automatically, providing access to the used smartcard.
2
3Remove the used smartcard (2) from its support.
Help
3
4Press out the new smartcard (3)
4
3 | 3 |
|
5Insert the new smartcard (3) into its support. Make certain that the chip (4) of the smartcard (3) is positioned upwards, with its bevelled corner on the left.
6Return the smartcard support to its closed position in the front cover. Once in place, slide it upwards to lock it in and close the front cover.
If the smartcard is not installed or not properly installed, the unit displays : MISSING GAUGE.
The smartcard monitors how much print ribbon is being used, and is always supplied with new print ribbons. The fax machine will not work unless the smartcard is installed.
67