Adjusting the ACTIVITY REPORT Setting
You can set the machine to turn on or off automatic printing of the ACTIVITY REPORT.
1 Press [Menu].
2 Press [
3 Press [
4 Press [
5 Press [
You can select from the following:
-<OUTPUT YES> to turn on automatic printing of the ACTIVITY REPORT
-<OUTPUT NO> to turn off automatic printing of the ACTIVITY REPORT
6 Press [Stop/Reset] to return to the standby display.
Adjusting the TX REPORT Setting
The machine can print a TX (transmission) report (TX REPORT or ERROR TX REPORT) after sending a document. You can set it to print every time it sends a document, or only when an error occurs. Alternatively, you can disable printing the report. By default, the machine is set to print a TX report only when an error occurs.
■TX REPORT
01/02 2005 17:52 FAX 1234567 | CANON | 001 |
*********************
*** | T X R E P O RT *** |
********************* | |
TRANSMISSION OK |
|
TX/RX NO | 0004 |
RECIPIENT ADDRESS | 1 432 2060 |
DESTINATION ID |
|
ST. TIME | 01/02 17:52 |
TIME USE | 00' 11 |
PAGES SENT | 1 |
RESULT | OK |
6
Reports and Lists