Canon MF5770, MF5750 manual RX Settings

Page 58

Name	Descriptions

4. TIME OUT	Enables/disables automatic scanning of documents
	after the fax number is entered.

ON	Scanning begins automatically in 5 or 10 seconds after
	you enter the fax number.

OFF	Press [Start] to scan document. Otherwise, AUTO
	CLEAR function activates and the LCD returns to
	standby display after 1 minute. (See Chapter 10,
	"Machine Settings," in the User's Guide.)

5. RX SETTINGS	Sets the reception functions.

1. ECM RX	The ECM (Error Correction Mode) reception is turned
	on or off.

ON	All receptions are conducted with ECM if the other
	party's fax supports ECM.

OFF	ECM is turned off.

2. FAX/TEL OPT. SET	If you select <FaxTel> as the receive mode, customizes
	its settings.

1. RING START TIME	Selects the time the machine takes to check whether a
	call is a fax or voice call.
	0SEC to 30SEC (8SEC)

2. F/T RING TIME	Selects the ring length for voice calls.
	15SEC to 300SEC (22SEC)

3. F/T SWITCH ACTION	Selects whether the machine switches to receive mode
	after the ring time has elapsed, or whether if
	disconnects the call.
	RECEIVE, DISCONNECT

3. INCOMING RING	Sets whether the telephone rings when it receives a
	voice call, enabling you to answer the call. This function
	is only available when the fax receive mode is set to
	<FaxOnly>.

OFF	The telephone does not ring when it receives a voice
	call.

ON	The telephone rings when it receives a voice call if a
	telephone is connected.

RING COUNT	Sets the number of incoming rings. The telephone will
	be disconnected after the specified times.
	1TIMES to 99TIMES (2TIMES)

8

Machine Settings

8-5

Image 58

Contents Facsimile Guide Network Connectivity and Setup Instructions Manuals for the MachineCopyright Trademarks Contents Chapter Receiving Faxes Chapter TroubleshootingMachine Settings Reports and ListsKeys Used in This Manual How to Use This ManualSymbols Used in This Manual Messages Displayed in the LCDOperation Panel IntroductionCustomer Support MF5770MF5750 Fax Mode Date & time Receive mode Standby DisplayRegistering Information in Your Machine Registering Sender InformationRegistering Your Fax/Telephone Number and Name Entering the Date and TimePress Menu Press or + to select Unit Name press OK Setting the Telephone Line Type Dialing Through a SwitchboardIf you selected Hooking Speed Dialing Methods Speed DialingRegistering One-Touch Speed Dialing Changing a Fax/Telephone Number You Registered Changing or Deleting an EntryChanging a Name You Registered Registering Coded Speed Dialing Deleting an Entire EntryRegistering Group Dialing Adding a Fax/Telephone Number to the Group Deleting a Fax/Telephone Number from the GroupDeleting an Entire Group Printing Speed Dialing Lists Touch ListSending Methods Adjust any necessary settings for your documentSending Faxes Memory SendingPress Start Manual SendingDial the recipients fax/telephone number Load the document in the ADF press FAXPress Exposure Press or + to adjust the density press OK Adjusting the Image Quality Fax ResolutionAdjusting the Exposure Scan Density Improving Faxed ImagesRegular Dialing When the Fax/Telephone Number Is Registered in the MachineDialing Methods One-Touch Speed DialingDirectory Dialing Coded Speed DialingGroup Dialing Press DirectoryManual Redialing Customizing Automatic Redialing SettingsRedialing a Busy Number Automatic RedialingIf you selected on Enter the fax/telephone numbers you want to send toSpecial Dialing Dialing an Overseas Number With PausesSwitching Temporarily to Tone Dialing Use the numeric keys to dial the international access codeTone dialing is canceled when you disconnect the call Select This Mode If Setting the Receive ModeReceiving Faxes Automatically FaxOnly Mode Receiving FaxesWhen You Receive a Fax Call When You Receive a Voice CallReceiving When an Answering Machine Is Connected AnsMode Receiving Faxes Manually Manual Mode Press Stop/Reset in the Fax mode Receiving Faxes in the Memory When a Problem OccursCanceling Receiving Press to cancel receivingSummary of Reports and Lists Reports and ListsReport or List Description Details Number of page being sent or received Error correction mode transactionPrinting the Activity Report Transaction durationAdjusting the TX Report Setting Adjusting the Activity Report SettingError TX Report Adjusting the RX Report Setting OK Reception successfulPrinting the User Data List Troubleshooting LCD MessagesTroubleshooting Error Codes Not RegisteredTroubleshooting Faxing Problems Sending ProblemsTroubleshooting Troubleshooting Receiving Problems Troubleshooting Troubleshooting Telephone Problems If a Power Cut Occurs If You Cannot Solve the ProblemMenu Descriptions Machine SettingsAccessing the Machine Settings Name DescriptionsMachine Settings OFF TX Settings RX Settings RX to Memory Standard ADD. Registration Appendix SpecificationsFacsimile Networking TelephoneDialing ConnectionIndex NumericsManual Mode Appendix Memo 230V