Canon MF5750, MF5770 manual RX to Memory

Page 59

8

Machine Settings

Name	Descriptions

4. MAN/AUTO SWITCH	Sets whether the machine switches to the document
	receive mode after the connected extension telephone
	rings for a specified length of time in the manual receive
	mode.

ON	The machine switches to document receive mode after
	the connected extension telephone rings for a specified
	time.

F/T RING TIME	Sets the length of time to elapse before the machine
	switches to the document receiving.
	1SEC to 99SEC (15SEC)

OFF	The connected extension telephone keeps ringing until
	someone answers the call manually.

5. REMOTE RX	Enables/disables remote receiving.

ON	The machine enables remote receiving.

REMOTE RX ID	You can dial code on the remote extension to start
	receiving a document.
	A combination of two characters using 0 to 9,	and #
	is possible. The default character is 25.

OFF	The machine disables remote receiving.

6. RX REDUCTION	Receives images at a reduced size.

ON	Image reduction is turned on.

1. RX REDUCTION	AUTO SELECTION: Reducing size is set automatically.
	FIXED REDUCTION: Reducing size is preset.
	97%, 95%, 90%, 75%

2.SELECT REDUCE DIR VERTICAL ONLY: Reduction is performed in the

vertical direction only.

HORIZ & VERTICAL: Reduction is performed in the horizontal and vertical direction.

OFF	Image reduction is turned off.

7. TONER SUPPLY LOW	Allows you to set how the machine responds when the
	toner supply is low.

RX TO MEMORY	The machine receives all documents in the memory.

KEEP PRINTING	The keep printing function is turned on. With this
	setting, the machine will not store documents in the
	memory if the toner has run out. Re-set to <RX TO
	MEMORY> after replacing the cartridge with a new one.

8-6

Image 59

Contents Facsimile Guide Manuals for the Machine Network Connectivity and Setup InstructionsCopyright Trademarks Contents Reports and Lists Chapter TroubleshootingMachine Settings Chapter Receiving FaxesMessages Displayed in the LCD How to Use This ManualSymbols Used in This Manual Keys Used in This ManualMF5770 IntroductionCustomer Support Operation PanelMF5750 Standby Display Fax Mode Date & time Receive modeRegistering Sender Information Registering Information in Your MachinePress Menu Press or + to select Unit Name press OK Entering the Date and TimeRegistering Your Fax/Telephone Number and Name Dialing Through a Switchboard Setting the Telephone Line TypeIf you selected Hooking Registering One-Touch Speed Dialing Speed DialingSpeed Dialing Methods Changing a Name You Registered Changing or Deleting an EntryChanging a Fax/Telephone Number You Registered Deleting an Entire Entry Registering Coded Speed DialingRegistering Group Dialing Deleting an Entire Group Deleting a Fax/Telephone Number from the GroupAdding a Fax/Telephone Number to the Group Touch List Printing Speed Dialing ListsMemory Sending Adjust any necessary settings for your documentSending Faxes Sending MethodsLoad the document in the ADF press FAX Manual SendingDial the recipients fax/telephone number Press StartImproving Faxed Images Adjusting the Image Quality Fax ResolutionAdjusting the Exposure Scan Density Press Exposure Press or + to adjust the density press OKOne-Touch Speed Dialing When the Fax/Telephone Number Is Registered in the MachineDialing Methods Regular DialingPress Directory Coded Speed DialingGroup Dialing Directory DialingAutomatic Redialing Customizing Automatic Redialing SettingsRedialing a Busy Number Manual RedialingEnter the fax/telephone numbers you want to send to If you selected onDialing an Overseas Number With Pauses Special DialingUse the numeric keys to dial the international access code Switching Temporarily to Tone DialingTone dialing is canceled when you disconnect the call Receiving Faxes Setting the Receive ModeReceiving Faxes Automatically FaxOnly Mode Select This Mode IfWhen You Receive a Voice Call When You Receive a Fax CallReceiving When an Answering Machine Is Connected AnsMode Receiving Faxes Manually Manual Mode Press to cancel receiving Receiving Faxes in the Memory When a Problem OccursCanceling Receiving Press Stop/Reset in the Fax modeReport or List Description Details Reports and ListsSummary of Reports and Lists Transaction duration Error correction mode transactionPrinting the Activity Report Number of page being sent or receivedAdjusting the Activity Report Setting Adjusting the TX Report SettingError TX Report OK Reception successful Adjusting the RX Report SettingPrinting the User Data List LCD Messages TroubleshootingTroubleshooting Not Registered Error CodesTroubleshooting Sending Problems Faxing ProblemsTroubleshooting Troubleshooting Receiving Problems Troubleshooting Troubleshooting Telephone Problems If You Cannot Solve the Problem If a Power Cut OccursName Descriptions Machine SettingsAccessing the Machine Settings Menu DescriptionsMachine Settings OFF TX Settings RX Settings RX to Memory Standard ADD. Registration Facsimile SpecificationsAppendix Connection TelephoneDialing NetworkingNumerics IndexManual Mode Appendix Memo 230V