9.
10.Remote Bass Gain Jack - connects
11.Status LED - Will indicate any fault condition in amplifier, also lights briefly during muting phase of
Output Plate
1 | 2 | 2 | 3 | 4 | 5 |
Figure 2
Figura 2
Abbildung 2
1.Speaker Connections - accepts up to 12 AWG speaker wire..
2.2 ATC Fuses - protects the amplifier from over current situations..
3.Power Connections - accepts up to 4 AWG power cables..
4.REM Remote
5.Ground Connection - accepts up to 4 AWG ground cable..
CEA Specifications
CO500.1
Power Output: 175 Watts RMS x 1 at 4 ohms and < 1% THD+N
Signal to Noise Ratio:
Additional Power: 250 Watts RMS x 1 at 2 ohms and < 1% THD+N
CO800.1
Power Output: 300 Watts RMS x 1 at 4 ohms and < 1% THD+N
Signal to Noise Ratio:
Additional Power: 400 Watts RMS x 1 at 2 ohms and < 1% THD+N
© 2007 directed