II
CYCLE OPTION BUTTONS (cont.)
ADDA GARMENT
[A_A Garment_/ The ADD A GARMENT light will be ch,mo _v_lighted! during the early portion of the
wash cycle to indicate that it is safe to pause the cycle to add more items. It is not necessary to press the button, as the light is controlled by the washer.
(See CHIME below.)
Once the ADD A GARMENT light goes out, additional laundry should not be added to the load. Doing so may result in unsatisfactory performance because the washer will not compensate for the additional garments.
OPress the START/PAUSE button to pause the washer.
To recall a my cycle:
Press the POWER button to turn on the washer.
Press the MY CYCLE button. The stored settings will be displayed.
OPress the START/PAUSE button to start the cycle.
NOTE: MY CYCLE can be adjusted the same as any other cycle. However, once any other button is pressed the LED will be turned off indicating that the settings are no longer those of your saved cycle.
_t Open the lid after it unlocks.
OAdd your additional items. _t Close the lid.
_t Press the START/PAUSE button. The cycle will resume after the lid locks.
CHIME
IAdd A Garment_ The volume of the chime is adjusted Ch_mo _ using the ADD A GARMENT button.
Press the button to change the vol- ume of the chime. The chime will sound at the new vol- ume with each press of the button. When no chime is heard, the chime is off. The volume settings are
LOW - HIGH - OFF.
MY CYCLE
I My Cycle | MY CYCLE allows you to store a CUS- |
PGMSave | tomized wash cycle for future use. It |
| allows you to save favorite tempera- |
ture, spin speed, soil level, and other options for a cycle, and then recall them at the touch of a button.
NOTE: You may only save setting for one cycle at a time. Pressing and holding the MY CYCLE button will overwrite any previously saved my cycle.
To save a my cycle:
0 Press the POWER button to turn on the washer.
0 Turn the Cycle Selector Knob to select the desired cycle.
0 Press the Cycle Modifier button to change the desired setting.
0 Press the Cycle Option button to add the desired options.
0 Press and hold the MY CYCLE button.
21
FABRIC SOFTENER
FabricSoftener_] finalFabricrinsesoftener. Selectis FABRICdispensedSOFTENERin the button to change final rinse from spray
rinse to deep rinse.
NOTE: The NORMAL/CASUAL cycle and the HEAVY DUTY cycle use a special JET SPRAY rinse to save water. If fabric softener is to be used with either of these cycles, then the FABRIC SOFTENER option or the EXTRA RINSE option must be selected. Either option will cause the cycle to end with a deep rinse instead of the spray rinse. All though the softener will be dispensed, fail- ure to select either option will result in poor fabric soften- er performance.
SOAK
Use the SOAK option to presoak gar-
Soak ments to help remove difficult spots or stains on fabrics. This option provid
180 minutes (maximum) presoak prior to the start of the selected cycle. At the end of the soak time, the selected cycle will begin using the water already in the tub.
II