II
UNPACKING THE WASHER
When removing the washer from the carton base, be sure the plastic tub support comes off with the base.
If you must lay the washer down to remove the base packaging materials, always protect the side of the washer and
lay it carefully on its side. DO NOT lay the washer on its front or back.
2. Remove the packing block containing the owner'smanual,
parts, water hoses, and laundry product samples. NOTE: Do not remove the foam block until the washer is at
the final location.
it
3. Unfasten the power cord from the back of the washer.
Tub support | Carton Base | TOOLS YOU WILL NEED |
• Adjustable Pliers
1.After removing the carton and shipping material, lift the washer off the foam base. Make sure the plastic tub support comes off with the base and is not stuck to the bottom of the washer.
• Carpenter's Level
8
II