Kenmore 796.292796 manual Before Calling for Service

II

BEFORE CALLING FOR SERVICE (cont.)

The display shows:

IJ H-

The display shows:

I I-

•Load is too small.

•Load is out of balance.

• Thermistor error

•Add 1 or 2 similar items to help balance the load.

•Rearrange items to help balance the load.

•The washer has an imbalance detection and correction sys- tem. If individual heavy articles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, the washer will make several attempts to restart the spin cycle. If an imbalance is still detected, the washer will stop and the error code will be displayed.

•The water temperature sensor is faulty. Unplug the washer and call for service.

The display shows:

I,i__-,:J-

The display shows:

L,"- _-

Staining

Wrinkling

•The water level sensor is not working correctly.

•Thermal overload protection circuit in the motor has been tripped.

•Laundry products were added directly to the tub or onto the laun- dry.

•Washer not unloaded promptly.

•Laundry not sorted properly.

•Washer not unloaded promptly.

•Washer overloaded.

•Hot and cold water inlet hoses are reversed.

•Close the water taps, unplug the washer, and call for service.

•Allow the washer to stand for 30 minutes to allow the motor to cool; then restart the cycle. If the LE error code still appears, unplug the washer and call for service.

•Load the laundry products into the dispenser.

•Always remove items from the washer as soon as the cycle is completed.

•Always wash dark colors separately from light colors and whites to prevent discoloration. If possible, do not wash heavily soiled items with lightly soiled ones.

•Always remove items from the washer as soon as the cycle is completed.

•The washer can be fully loaded, but the tub should not be tightly packed with items. The lid of the washer should close easily.

•Hot water rinse can set wrinkles in garments. Check the inlet hose connections.

NOTE: If an error message is displayed for 4 minutes, the water 1 minute prior to draining and the original error code will continue

28

in the tub will automatically drain. An alarm will sound to be displayed.

II