installation
Air Shutter Adjustment (continued)
1.Repeat procedure for each burner requiring adjustment. Be sure to tighten air shutter setscrews when finished.
2.Once adjusted, turn the burner OFF and reverse steps to reassemble.
Low Setting Adjustment Grill and
Open Burners
The valves on your Dynasty grill feature an adjustable low setting. Due to fluctuations in gas pressure, heating value or gas conversion, you may feel it necessary to increase or decrease gas flow in the low position.
1.Begin by lighting the burner.
2.Turn the control knob to the lowest setting, all the way counter clockwise. The arrow will stop between MED and LOW.
3.Remove knob.
4.Hold the valve shaft with a pair of pliers and insert a thin, flat tipped screwdriver into the shaft. While viewing the burner, adjust to a minimum stable flame.
5.WARNING! Look for stability in the low flame setting. A too small burner flame may go out or be extinguished easily. Unburned gas can then escape creating a hazardous condition.
BEZEL
VALVE STEM
NOTE: It is normal to hear a popping sound when the burners are first turned OFF.
12