INSTALLATION OF YOUR DYNASTY GRILL
installation
Safe and satisfactory operation of your Dynasty grill depends upon its proper installation. The installation, adjustments and service of your Dynasty grill must be performed only by
qualified installers and service technicians. This is necessary to insure proper operation and also to prevent accidents.
Location
When determining a suitable location take into account concerns such as exposure to wind, proximity to traffic paths and keeping any gas supply lines as short as possible. Locate the grill only in a well ventilated area. For free standing models allow 12" from the sides and rear to adjacent combustible construction.
Built-in Installation
Your Dynasty grill is designed for easy installation into a
The supporting deck and counter must be level and flat. When determining the final location for your grill it is required that ventilation holes be provided in the enclosure so that gas will not become trapped in the event of a leak (See page 9).
When installing your Dynasty grill in a combustible enclosure, it is necessary to use a suitable insulated jacket or sleeve; follow cabinet cut out dimensions as shown on page 7. Use only an insulated jacket or sleeve manufactured by
Built-in Design Models
If using a rear wall, locate the weather proof electrical outlet on the
NOTE: See dimension tables in page 7 referring to figure below. When installing a grill, side burner, or bartender on a cabinet with bullnose, dimension "A" is the width of appliance plus 1/8 clearance.
4 X 4 MIN. OPENING FOR | 4 X 4 MIN. OPENING FOR |
REAR GAS CONNECTION | BOTTOM GAS CONNECTION |
3 PRONG PLUG
6