Teledyne 9060Z 9060H 9060UL/UH Application, Temperature Range, Length, Process Connection, Cable

Model 9060Z Manual

Probe insertion length (from process end of mounting thread to probe sensing tip.

3.1.3 SERIES 9060H PROBES SPECIFICATIONS

MODEL	9060H	9060UL/UH
Application	Combustion flue	Combustion flue gases
	gases below	above 700°C (1290°F) with
	900°C (1650°F)	no contaminants.
	Refer to note 1	eg. natural gas, light oils
Temperature Range	0 to 900°C. Refer to note 2	700 to 1400°C
	(32 to 1650°F)	(1470 to 2550°F)
Length	250 to 2000 mm	500 to 1500 mm
	(10” to 80”)	(20” to 60”)
Process Connection	1 ½ BSP " or NPT	¾ BSP " or NPT
Electrical Connection	Weatherproof plug‐in connector or optional screw terminals. The plug
	connector can be supplied with the cable.
Cable	Order a specific length with the transmitter
Heater	Yes	No
Thermocouple	K, integral	R, integral
Response Time	Typically < 4 secs.	Typically < 1 sec
Head Temperature	‐25 to 100°C (‐15 to 210°F) with weatherproof connector
	‐25 to 150°C (‐15 to 300°F) with screw terminals
Reference Gas	Ambient air, 50 to 150 cc/min (3 to 9 scim). Pump can be supplied with
	transmitter.
Ref Air Connection	1/4 NPT "	Integral air line in probe cable.
		Barbed fitting to 3/16" ID PVC tube.
Filter	Removable sintered titanium alloy particulate filter, 30 micron standard,
	optional 15 micron available. Refer to note 2
Calibration Check Gas	1/8 NPT female "	1/8 NPT female "
Connection
Weight	2 kg (4.4 lb) plus	1 kg (2.2 lb) plus
	165 g (5.8 oz) / 100 mm	100 g (3.5 oz) / 100 mm
	(4”) length	(4”) length

Notes: 1. Care must be taken to avoid contact with explosive or inflammable gases with 9060H heated probes when hot. Teledyne Analytical Instruments transmitters have built in safety protection.

2. Process gas temperature must be below 800°C if the filters are fitted.

Please contact factory for corrosives other than sulfur or zinc. We can provide test materials to try in your atmosphere.

11