Teledyne 9060Z manual Keypad

Model 9060Z Manual
5.3 KEYPAD	28
5.3.1 Keypad in RUN mode	29
5.3.2 Keypad in SETUP / COMMISSIONING / CALIBRATION modes	29
6. SETUP MODE	31
6.1 FUNCTION SUMMARY TABLE	31
6.2 CHANGING OPTIONS	31
6.3 SETUP MODE FUNCTIONS	32
6.3.1 Probe 1 Offset	32
6.3.2 Lower Line Items	32
6.3.3 Oxygen Display Units	33
6.3.4 Damping Factor	33
6.3.5 Process Alarms	33
7. COMMISSIONING MODE	34
7.1 FUNCTION SUMMARY TABLE	34
7.2 COMMISSIONING MODE FUNCTIONS	36
7.2.1 Internal Date / Time	36
7.2.2 Service Date	36
7.2.3 Number of Probes	36
7.2.4 Probe 1 & 2 Type	36
7.2.5 Probe 1 & 2 Thermocouple Type	36
7.2.6 Auxiliary Thermocouple Type	36
7.2.7 Transmitter Output Channel 1 & 2	36
7.2.8 Flue Pressure Units and Value	38
7.2.9 Temperature Units	38
7.2.10 Calibration Freezes Outputs	38
7.2.11 Solenoid 1 & 2 Operation	38
7.2.12 Solenoid 1 & 2 Automatic / Manual	38
7.2.13 Solenoid 1 & 2 Start Time	38
7.2.14 Solenoid 1 & 2 Period	38
7.2.15 Solenoid 1 & 2 Duration	38
7.2.16 Solenoid 1 & 2 Post Freeze	39
7.2.17 Oxygen Content Calibration Gas 1 & 2	39
7.2.18 Maximum Calibration Gas 1 & 2 Positive / Negative Error	39
7.2.19 Process Alarms	39
7.2.20 Alarm Relay 1, 2 and 3 Function	39
7.2.21 Common Alarm Relay Function	39
7.2.22 Operation of the Alarm Relays when an Alarm is Accepted	40
7.2.23 Selecting the Correct Fuel	40
7.2.24 Reference Air Pump Options	40
7.2.25 Communications Port Options	41
7.2.26 Alarm Log Clearing	41
8. CALIBRATION MODE	42

3