Model 9060Z Manual
Teledyne Analytical Instruments series 9060H oxygen probes and sensors employ state‐of‐the‐art zirconia sensors and advanced materials, which provide the following benefits:
∙Improved control due to fast response time to typically less than four seconds
∙Cost‐efficient design provides improved reliability
∙Longer‐life probes with greater resistance to corrosion from sulfur and zinc contaminants in flue gas
∙Low cost allows maintenance by replacement
∙Reduced probe breakage due to greater resistance to thermal shock and mechanical damage during installation and start‐up
Series 9060H probe or sensors are simple to install and maintain. All models provide direct measurement of oxygen level. On‐line automatic calibration check is available if required. Probes or sensors may be used with Teledyne Analytical Instruments oxygen transmitters and some model transmitters from other manufacturers.
All Teledyne Analytical Instruments oxygen probe or sensors are designed and manufactured to exacting standards of performance and reliability. Series 9060H probe or sensors are the result of extensive research and development by Teledyne Analytical Instruments, industry and government agencies. Teledyne Analytical Instruments provides application and after sales support for oxygen probes, sensors and transmitters, worldwide.
Model 9060H Heated Oxygen Probe
Model 9060UL/UH Unheated Oxygen Probe
2.3 Warning Symbols
Danger, high voltage. Risk of electrical shock.
Caution hot surface.
9