4.Click Advanced to set up input and output settings for the LAN fax product.
5.Click Browse to select the network folder that the fax software uses.
6.Complete the Credentials to Access Folder section, if required. Then click Verify Folder Access to test the credentials and verify access to the folder.
7.Click Apply to save the LAN fax settings.
To configure Internet fax
With an Internet fax service, faxes are sent in
1.On the HP DSS server, open the HP MFP DSS Configuration Utility and click the Fax tab.
2.Select Internet Fax from the Fax Method
Software features
Figure 3-8 Configuring Internet fax
34 Chapter 3 Software features | ENWW |