Software features
Figure 3-11 The Folders tab
To configure the send-to-folder feature
1.On the HP DSS server, open the HP MFP DSS Configuration Utility and click the Folders tab.
2.Select the Enable Send to Folder check box.
3.Click Add… to add a new folder. The Add Predefined Folder dialog box appears.
4.Type a name for the folder into the Alias Name text box. This name appears on the device
5.Click Browse… to browse to a folder location, and then click OK to accept it.
NOTE Supported operating systems for folder destinations are Windows 98, Windows NT, Windows 2000, Windows XP, Windows 2003, and Novell NetWare.
6.Select the credentials that should be used to gain access to the folder from the Access Credentials
ENWW | Using the |