GE ACB AJCS 10, ACB AJCQ 10, ACB AJCS 12 DCB, ACB AJCH 12 Care and Cleaning Operating Instructions

Page 2

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Care and Cleaning Operating Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the mode control OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

Instructions

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips Installation

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Write the model and serial numbers here Serial #Care and Cleaning Operating Instructions InstructionsCare Operating InstructionsTips Consumer Support Consumer Remote Control InstructionsTroubleshooting Tips Air Direction SafetyFan Switch Vent ControlAuxiliary Controls Temperature Limiting Page Heat Pump Models Mode ControlCooling/Heating Descriptions Temp ControlTemperature Limiting Cleaning InstallationGrille and Case Care and cleaning of the air conditionerCleaning Operating Instructions Safety Instructions Outdoor CoilsHow to Insert the Batteries Air FilterModel Qualifying Questions Before YOU BeginElectrical Requirements Tools YOU MAY Need GE KIT NumbersInstalling a J-MODEL in AN Existing Wall Case Attach Front GrilleSupport Requirements for AIR Conditioner Installing Through the WallPrepare Opening in Wall Window INSTALLATION-OPTIONAL Window RequirementsStorm Window Requirements Wood Pieces Width 2″Install Sill Supports Prepare WindowMEASURE, CUT and Install Filler Panels Right LeftInstall Case in Window Install Window Gasket and Locking Bracket Replace AIR Conditioner in CaseBefore you call for service… Consumer Support Normal Operating SoundsGE Will Replace Air Conditioner WarrantyTroubleshooting Tips Consumer Support For The PeriodInstructions de sécurité Instructions de fonctionnement Avertissement Cas de panne Instructions de montage Entretien et NettoyageTélécommande Interrupteur du ventilateur Consommateur En cas de panne Commande d’éventSécurité Direction de l’airCommandes auxiliaires Limitation de température De sécurité Commande du modeCommande de la température Instructions de montageLimitation de la température Direction de la sortie d’airSerpentins extérieurs Entretien et nettoyage du conditionneurGrille et boîtier Pour retirerComment insérer les piles Mise EN Garde Ne faitesFiltre à air Avant DE Commencer Exigences EN Matière ’ALIMENTATION ÉlectriqueOutils Dont Vous Pouvez Avoir Besoin Numéros DE Trousses GE’AIDE D’UNE Agrafe Retirez LA Plaque DE Verrouillage SUR LE Côté Gauche AvantGlissez Délicatement LE Conditionneur Dans LE Logement Fixez LA Grille FrontaleSupport DU Conditionneur Installation À Travers LE MURPréparation DE L’OUVERTURE Dans LE MUR Installation DE Fenêtre EN Option Instructions Relatives À LA FenêtreInstructions Relatives À LA CONTRE-FENÊTRE Retirez LE Conditionneur DE SON LogementInstallez LES Supports DE Seuil Préparez LA FenêtreMESUREZ, Coupez ET Installez LES Panneaux DE Fermeture Montez LE Logement Dans LA Fenêtre Replacez LE Conditionneur Dans SON Logement Avant d’appeler le service Bruits normaux de fonctionnementCe qui n’est pas couvert Garantie du conditionneur d’airNous remplacerons Et nettoyage Instructions de montage EnProlongation de garantie Service de réparationsSoutien au consommateur Cuidado y limpieza Serie NoApoyo al consumidor Solucionar problemas Cuidado y limpiezaLimpieza Instalación Solucionar problemas PrecauciónControl remoto Control remotoControl del escape Interruptor del ventiladorLimpieza Modo FAN Ventilador Dirección del aireApoyo al consumidor Solucionar problemas Instalación Controles auxiliares-Limitación de temperaturaNotas Modelos con bomba de calor Descripciones de enfriamientoControl de la temperatura Para calefacción máxima SeleccioneLímite de la temperatura Dependiendo Del modeloBobinas exteriores Cuidado y limpieza del acondicionador de aireRejilla y caja Rejilla delanteraCómo insertar las baterías Precaución No opere elFiltro de aire Antes DE Iniciar Requisitos EléctricosHerramientas QUE Podría Necesitar Números DE KIT DE GECómo Instalar UN Modelo J EN UNA Caja DE Pared Existente UNA LA Rejilla DelanteraRequisitos Para EL Apoyo DEL Acondicionador DE Aire Cómo Instalar a Través DE LA ParedPrepare LA Abertura DE LA Pared Requisitos DE Apoyo Para EL Acondicionador DE AireInstalación DE VENTANA-OPCIONAL Requisitos Para LA VentanaRequisitos DE Ventana Para Tormenta Retire EL Acondicionador DE Aire DE LA CajaPrepare LA Ventana Instale LOS Soportes DE LA Alfajía ExteriorMIDA, Corte E Instale LOS Paneles DE Relleno CentroInstale LA Caja EN LA Ventana Instale EL Empaque Para LA Ventana Y EL Soporte DE Bloqueo Reemplace EL Acondicionador DE Aire EN LA CajaAntes de llamar para solicitar servicio… Sonidos de operación normalesNotas Nosotros reemplazaremos Garantía de su acondicionador de aireLimpieza Lo que no está cubiertoGarantías ampliadas Apoyo al Consumidor Página Web de GE AppliancesSolicite una reparación Piezas y accesoriosConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio
Top Page Image Contents