Wall Button Installation, Wall Button location

3WALL BUTTON INSTALLATION

WARNING

Verify there is NO power to the opener before installing Wall Button wires and Wall Button.

CAUTION

Staples which are too tight can cut or pinch wires. Cut or pinched wires can cause the Wall button to stop working. When using the insulated staples, make sure you fasten them only as tightly as needed to hold the wire snugly.

WARNING

Use of any other wall control can cause the door to operate unexpectedly and the light not to work. Use only the included Wall Button.

NOTE: For Wall Button, wire and insulated staples locate Bags 6 and 7 from Box 2.

1.Wall Button location.

•Wall Button location should be in direct sight of door.

•It should be at least five feet (5') above floor to prevent small children from operating door.

•It must be away from any moving parts. (You should NOT be able to reach the garage door while standing at Wall Button.)

•Wall Button board screw connections are polarized, (+) positive and (-) negative.

2a. Wiring (If pre-wired).

•Locate Wall Button pre-wired wire ends (Fig. 3-1). (They should be located within the guidelines mentioned above.)

•Split and strip ends of wire (Fig. 3-2).

•Fasten wire to Wall Button board screws on back of Wall Button.

–Striped wire to the + (plus) terminal.

–White wire to the - (minus) terminal.

2b. Wiring (If NOT pre-wired).

•Pick a convenient location for mounting Wall Button using the guidelines mentioned above (Fig. 3-1).

•Run wire from Wall Button to power head

(Fig. 3-1).

•Split and strip ends of wire (Fig. 3-2).

•Fasten wire to control board screws on back of Wall Button.

–Striped wire to the + (plus) terminal.

– White wire to the - (minus) terminal.

FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM

Wire from

power head

to wall control.

Wall control

"Entrapment" warning label

Separate
entry door	EXAMPLE ONLY!
	EXAMPLE ONLY!

This is an example of wire routing when NOT pre-wired. Your wire routing may be different.

FIG.3-1 Wall Button wire routing

2"		or	B
	1/2"	or


		or	W
			W

FIG. 3-2 Splitting and stripping.

PN# 36420Supplement, 10/27/2008	15

1042 specifications

The Genie 1042 is a versatile and efficient aerial work platform designed to meet the demands of various industries, from construction to maintenance and operations. This compact boom lift is renowned for its remarkable lifting capabilities and user-friendly features, making it a favorite among professionals seeking reliability and performance.

One of the standout features of the Genie 1042 is its impressive working height, reaching up to 40 feet, and a horizontal outreach of 22 feet. This combination of height and reach makes it ideal for tasks that require working at significant elevations while still maintaining a solid base. The platform extends and retracts smoothly, providing operators with the flexibility to navigate around obstacles and access hard-to-reach areas effectively.

Powered by an efficient electric motor, the Genie 1042 operates quietly, making it suitable for indoor use and residential areas where noise restrictions may be a factor. The electric motor also offers zero emissions, aligning with modern environmental standards and preferences for greener equipment. Its compact design, with a width of just 4 feet, allows it to maneuver easily through standard doorways and tight spaces, enhancing its practicality on job sites.

Safety is a priority with the Genie 1042, featuring an intuitive operator control system and standard safety measures, including a tilt sensor and emergency stop buttons. The platform is equipped with guardrails, ensuring operator security while working at height. The sturdy construction of the Genie 1042 also contributes to stability, enabling users to focus on their tasks without worrying about the integrity of the lift.

Additionally, Genie has incorporated advanced technologies into the 1042 model, including a diagnostics system that provides real-time feedback on the machine's performance. This feature enhances maintenance efficiency, allowing operators to monitor the health of the platform and address potential issues proactively.

In summary, the Genie 1042 embodies a combination of height, outreach, and compactness, backed by reliable electric power, advanced safety features, and intelligent technology. Whether used in construction, maintenance, or any other sector requiring elevated work, the Genie 1042 proves to be a formidable tool that enhances productivity while prioritizing operator safety and environmental responsibility.