UP/DOWN Force, Erase OPEN/CLOSE Travel Limit

UP/DOWN FORCE

1.By turning the Down Force Control CLOSE clockwise,

the DOWN force can be increased. By turning the Down Force Control CLOSEcounter-clockwise, the DOWN force can be decreased. Set the DOWN force level at the minimum force required to close door without reversing.

2.Once the desired level is selected, this stores the maximum force level for the DOWN direction in memory.

OPEN

3.By turning the Up Force Control clockwise, the

UP force can be increased. By turning the Up Force

OPEN

Control counter-clockwise, the UP force can be decreased. Set the UP force level at the minimum force required to open door without stopping.

4.Once the desired level is selected, this stores the maximum force level for the UP direction in memory.

ERASE - OPEN/CLOSE TRAVEL LIMIT

1.Press and hold both of the "SET" buttons ( SET & SET ) together until the green indicator light blinks (about 5 seconds).

2.All close and open travel limit settings are erased. Then follow the steps above to reprogram close and open travel limits.

NOTE: The opener will not close the door automatically unless the Safe-T-Beam®System is installed.

Up Force

OPEN Control

Adjustment

FORCE	ROTATE
FORCE	CLOCKWISE
	ROTATE
	COUNTER-CLOCKWISE

CLOSE Down Force

Control

Adjustment

FIG. 6-5 Force Control Adjustment.

CONTACT REVERSE TEST

The force adjustments and limit switch settings MUST BE COMPLETED before testing.

1.Testing.

•Open garage door using Wall Button.

–Place a 2" x 4" board (laid flat) under center of garage door opening (Fig. 6-6).

•Close door using Wall Button.

•When door contacts board, it must stop and reverse (within 2 seconds) to open position.

2.Adjustment.

•If the door does not properly reverse.

–Check to see if door has "close" limit programmed. It should not have reached its "close" limit before hitting board.

–If the door STOPS but does not reverse, decrease "CLOSE FORCE" control CLOSE setting slightly (turn it counter-clockwise).

•Test again. Repeat as necessary until door reverses upon contacting board.

FIG. 6-6 2 x 4 under center of door opening.

22	PN# 36420Supplement, 10/27/2008

1042 specifications

The Genie 1042 is a versatile and efficient aerial work platform designed to meet the demands of various industries, from construction to maintenance and operations. This compact boom lift is renowned for its remarkable lifting capabilities and user-friendly features, making it a favorite among professionals seeking reliability and performance.

One of the standout features of the Genie 1042 is its impressive working height, reaching up to 40 feet, and a horizontal outreach of 22 feet. This combination of height and reach makes it ideal for tasks that require working at significant elevations while still maintaining a solid base. The platform extends and retracts smoothly, providing operators with the flexibility to navigate around obstacles and access hard-to-reach areas effectively.

Powered by an efficient electric motor, the Genie 1042 operates quietly, making it suitable for indoor use and residential areas where noise restrictions may be a factor. The electric motor also offers zero emissions, aligning with modern environmental standards and preferences for greener equipment. Its compact design, with a width of just 4 feet, allows it to maneuver easily through standard doorways and tight spaces, enhancing its practicality on job sites.

Safety is a priority with the Genie 1042, featuring an intuitive operator control system and standard safety measures, including a tilt sensor and emergency stop buttons. The platform is equipped with guardrails, ensuring operator security while working at height. The sturdy construction of the Genie 1042 also contributes to stability, enabling users to focus on their tasks without worrying about the integrity of the lift.

Additionally, Genie has incorporated advanced technologies into the 1042 model, including a diagnostics system that provides real-time feedback on the machine's performance. This feature enhances maintenance efficiency, allowing operators to monitor the health of the platform and address potential issues proactively.

In summary, the Genie 1042 embodies a combination of height, outreach, and compactness, backed by reliable electric power, advanced safety features, and intelligent technology. Whether used in construction, maintenance, or any other sector requiring elevated work, the Genie 1042 proves to be a formidable tool that enhances productivity while prioritizing operator safety and environmental responsibility.