Brother XL-6040 important safety instructions Buttonhole Fine Adjustment

ОБМЕТЫВАНИЕ ПЕТЕЛЬ

И ПРИШИВАНИЕ ПУГОВИЦ

KNOPFLBUTTONHOLE ÖCHER UND KNAND BUTTON ÖPFE NSEWING ÄHEN

1

2

3 4

F

55

F F

6

7

8

9 9

+ – + –

Buttonhole Fine Adjustment

If the stitching on the two sides of the buttonhole do not appear uniform, the following adjustments can be made.

1.Set the Stitch Length Dial at “F-1.5” and stitch the right side of the buttonhole on a scrap of fabric while observing how the material is fed.

2.If the right side of the buttonhole is too coarse or fine, adjust the feeding of the material with the Stitch Length Dial.

1Right row

2 Stitch length

3 Shorter

4 Longer

5 Adjusted stitch

3.After obtaining a satisfactory feeding on the right side, stitch the left side of the buttonhole and observe the feeding.

4.If the left side is too coarse or fine compared to the right side, adjust the buttonhole fine adjustment screw as described below.

If the left side is too coarse, turn the screw with the enclosed large screwdriver in the – direction.

If the left side is too fine, turn the screw with the enclosed large screwdriver in the + direction.

This adjustment allows both sides of the buttonhole to appear

uniform.

6Stitch length dial

7Buttonhole fine adjusting screw

8 Right row

9 Adjusted stitch

61