Brother XL-6040 important safety instructions Checking the Needle, Replacing the Needle

КРАТКОЕ ТЕХНИЧЕСКОЕ ОПИСАНИЕ МАШИНЫ

KENNENLERNEN	KNOWINGYOUR
IHRERMASCHINE	SEWINGMACHINE

1

2

1

2

3

4

Checking the Needle

The sewing needle must always be straight and sharp for smooth sewing.

To Check the Needle Correctly:

To check the needle, place the flat side of the needle on a flat surface. Check the needle from the top and the sides. Throw away any bent needles.

1Parallel space

2Level surface (bobbin cover, glass, etc.)

*Place a level surface under the needle.

Replacing the Needle

CAUTION

• Turn the main power switch to OFF before changing the needle. If the main power is left on and foot controller is stepped on, the machine will start and injury may result.

• Use only sewing machine needles for home use. Other needles may bend or break and cause injury.

• Never sew with a bent needle. A bent needle will easily break and cause injury.

1. Remove the power supply plug from the outlet.

2. Raise the needle bar to its highest position.

3. Lower the presser foot.

4. Remove the needle by loosening the needle clamp screw.

1 Presser foot lever

CAUTION

Do not loosen or tighten the needle clamp screw with a strong force, otherwise it may be damaged.

5.With the flat side of the needle facing the back, insert the new needle all the way to the top of the needle stopper (viewing window) in the needle clamp. Use a screwdriver to securely tighten the needle clamp screw.

2Needle stopper

3Hole for setting needle

4 Flat side of needle

CAUTION

Be sure to push in the needle until it touches the stopper, and securely tighten the needle clamp screw with a screw- driver. If the needle is not completely inserted or the needle clamp screw is loose, the needle may break or the machine may be damaged.

9