Mitsubishi Electronics TG-2000A Time Set-up, Function Contents, Set the date/time . Procedure

Page 53

8.10 Time Set-up

The time set -up function comes in two types, date/time set -ups and time monitor set -ups .

Function

Contents

Date/time set -up

Sets the date/time of all G-50A units connected to the PC (personal computer)

 

as soon as the PC date/time is set.

Time monitor

Confirms the difference in time between the time reference machine (G-50

 

No.1) of this system and all G-50A units except for No. 1 and the PC.

*PC means a personal computer on which the integrated software TG -2000A operates.

<Precautions for using this function>

For this system, the G-50A main unit collects the operation data of the air conditioner from the indoor unit to which the G-50A is connected in order to calculate the air-conditioning charge on the basis of the data using the set capacity and charge unit cost. When there is a difference in time between the G-50A main unit and PC on which the integrated centralized control software TG -2000A operates, it becomes unable to correctly execute the calculation.

Consequently, the time adjustment is executed everyday between the integrated software and G-50A to correct the difference in time between each unit. (The time adjustment is based on the No.01 G-50A.) Because of the reasons shown above, it is not basically necessary for this system to adjust the time manually, except for the initial setting. Therefore, when the charging function is used, do not adjust the time unnecessarily.

Set the date/time . [Procedure]

1)Select [Time set -up] button.

Click the [Time set-up] button located in the system setting group on the initial window.

2)Select the [Date/time set -up] button.

Click the [Date/time set-up] button on the time set-up select screen.

3)Select the part you want to change.

Click “Year”, “Month”, “Day”, “Hour”, “Minute”, or “Second” you want to change.

4)Select the “/ ” button.

Use the “ /” buttons to change the numbers of the

part to be changed.

Time set-up select window

5)Click [OK] button after finishing all settings. When done with these settings, click the [OK] button.

*When the [Cancel] button is clicked, this setting is terminated to return to the initial screen.

Note:

•The alarm message shown in the following illustration is displayed when the [Date/time set -up] button is clicked.

OK : Displays the date/time set -up screen.

Cancel : Returns to the system set -up screen without displaying the date/time set -up.

Time set-up window

Time Change Not Allowed dialog box

50

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Please keep this manual for future use Please read this manual before using the unitContents Page Do not use with other applications Safety PrecautionsOther machines ¡ *1 System Requirements Requirements system recommendationsCompatible Units Restrictions RestrictionsNumber of units M e Manufacturer Model Other DevicesHardware Connection Diagram System Configuration System Configuration ExampleTools for Site Adjustment Flow of Site AdjustmentPC connections and settings 50A test runD e l s IP address range Test operation from centralized controller G-50APage G-2000A Setup InstallationPreparing for installation Steps Action Details How toMsde setup Running TG-2000A Setup New setupDatabase setup When the installation is completed, restart the computerInstallation start confirmation Check the installation folderTG-2000A setup completion Read the license agreementMsde uninstall G-2000A UninstallTG-2000A uninstall Part Names and Functions Window Elements Basic Mouse Operation Accessing Functions and Moving between WindowsShift from the initial window to the control window Shift from the control window to the initial windowPage Page User Set -up Set TG -2000A functions Page Page Startup Initial Startup and Shutdown Before StartupShutting down the OS ShutdownTG-2000A Shutdown System Setting Procedure System Setting Procedure System Setting ScreenGeneral Operation User Set-upReliability Function Connection SettingSite Name Set-up Energy Monitoring RelatedPage G-50 Connection Set-up Setting Procedure and RestrictionsNumber of G-50A se t-up Step IP address of G-50A se t-up StepMonitor the optional functions being used. Procedure System Configuration Set-upUnit composition set-up Step 2 G-50A data collection StepIcon Name Address range Change the unit configuration. ProcedureSe t-up of refrigerant system Step Set-up of group Step Change the group No. Procedure Interlocked setting StepInterlocking ventilation unit Interlocking destination un-set unitSet-up of model name Step Configuration Procedure and RestrictionsMonitoring Screen Set-up Set-up of the number of floors, and floor name Step Set-up of floor name and G -50 Creation of a plane view StepFloor Selection Display Button Set-up of icon arrange and name StepSet the group icons on each floor and set their names Group ListDeleting block settings Set the block groups. ProcedureSet-up of block Step Name Change button Block Set button Release buttonChanging the block name Check before WHM setup. Procedure Setting Procedures and RestrictionsModel Baud rate Parity Stop bit Energy Monitoring S e t-up Set Charge System options. ProcedureDivision mode for outdoor unit Division mode StepDivision mode for indoor unit Proportiona l division reference dataDelete Watt Hour Meter Relationships Select the OC icon, and click on the selected outdoor unitDeleting Watt Hour Meter Relationships Relation between indoor units and watt hour meters StepSet the Indoor Unit and Watt Hour Meter Relationship Charge Blocks Step Set the charge blocks. Procedure Add charge blocks Delete the charge block Release a block from charge blocks Manually Setting the Currency Selecting a Currency from the Display ProcedureExit the Currency Settings Set the electric power rate schedule. Procedure10Standard charge set Step Set the standard charge . ProcedureTime Set-up Function ContentsSet the date/time . Procedure Monitor button Monitor the timeChange the password Password S e t-upNo repair is required Overview Remarks Preparing for Charging Data Maintenance Maintenance of Charge DataMaintenance Methods and Restrictions Display the Maintenance screen. ProcedureMaintaining Apportioned Unit Data Unit Data MaintenanceCorrection method Maintenance example Maintaining watt hour Meter Data Procedure Watt Hour Meter Data MaintenanceDescription of function Watt hour Meter Monitor Function ProcedureOperation Amount Data Monitoring Monitor the data for the last day after Charge Parameter OutputMonitoring operation amount data Performing charging remedy Charging RemedyOutput file data format Preparation Preparing to perform charging remedyApportioning integrated Remark InterVal Remedial apportioning setting screenRemedial apportioning confirmation screen Calculating screen Remedy when personal computer HDD fails no backup Remedy when personal computer HDD fails backup Day before recovery day Apportioning method when computer crashes Remedy when watt hour meter fails monitoring impossible Integrate d Remedy for system information setting error Total air-conditioning charge including that Air-conditioning unit error codes Error Code ListPage Page System error codes Detail of function Setting Check ListSetting item Case Test run check sheet Test Run CheckLRC Date Tester Test item Comment Charging Test Run CheckCharging No WHM connection Test Run Check Page Capacity Setting Division mode Charge settingCheck Within Outside TotalExample 1100 conditioner 1300 Outside Within 12001400 Page Page WHM1 WHM2 WHM3 WHM4 WHM5 WHM6 Memo Setup Procedure Appendix 1 Installing Windows XP ProfessionalPreparing for Se tup What you needPage Windows Appendix 2 Auto Log-in Confirmation MethodWindows XP Page WT03901X01
Top Page Image Contents