Mitsubishi Electronics TG-2000A Creation of a plane view Step, Set-up of floor name and G -50

8.7.4 Creation of a plane view (Step 3)

Follow these steps to create a floor plane for each floor. This floor plane is used in air conditioning operation and supervision for each floor. If not displaying a floor plane, it is not necessary to create one.

Create a floor plane for each floor
	[Procedure]		Base plane
			Floor plane
	1) Click the Base [Change]	button.
	In the Floor Plan Settings window, click the
	[Change] button to edit the flow chart. The paint
	brush appears.
	Maintenance Tip		Floor selection
	• When Paint Brush Mode is activated, the file
	name and graphic size is set and should not
	be changed. If changed, the floor plane may
	not display correctly.
	2) Create a floor plane flow chart .
	Create a floor plane flow chart with the paint brush.
	* For details, see the Windows 2000/XP users
	guide.		Creation of a plane view screen
	3) Exit Paint Brush Mode.
	Click the file menu and select the Exit Paint Brush
	option. Select “Yes” on “the save confir- mation
	screen”.
	4) Select a floor using the “	/ ” button
	Use the “ / ” button to select the floor to be
	modified.
	5) Click the Base [Copy ] button.

To apply the created flow chart to the selected
floor, click the Base [Copy] button. It is not
necessary to click the Base Copy button when
creating a new floor plane.
6) Click the [Change] button
To create or edit a floor plane for the selected floor,	Paint Brush window (initial state)
click the [Change] button. The paint brush starts
up, and the floor plane can be edited.

7)Create a floor plane.

Use the paint brush to edit the floor plane of the selected floor.

8)Exit the paint brush.

Click the paint brush File menu and select the Exit Paint Brush option.

9)Click [OK] button.

After a floor plane has been created, click the [OK] button

*When the [Cancel] button is clicked, this setting is terminated to return to the initial screen.

8.7.5 Set-up of floor name and G -50 (Step4)

Follow these steps to set the G-50A for each floor.

Set floor and G-50A assignments [Procedure]

1)Select the G-50A.

In the Floor and G/W Options window, click the check box of the G-50A to be assigned to each floor.

: Unassigned

: Assigned

Assign a G-50 to every floor. (Up to 5 of G-50A can be set to each floor.)

2)Click the [OK] button.

When finished with these settings, click the [OK] button.

*When the [Cancel] button is clicked, this setting is terminated to return to the initial window.

Check box

Set-up of floor name and G-50A screen

36