list snmp communities | These commands display the defined SNMP communities, which you previously |
or list snmp | defined using the add snmp community command. SNMP trap_communities does |
trap_communities | not list access. |
| Community Name - community designation for the IP address |
| IP address - IP address of a member of the community |
| Access (Read/Write) - type of access a member has to MIBs |
list syslog | Displays IP addresses which get syslog entries from the system. See add syslog for |
| more information, and delete syslog command to remove entries. This command |
| shows: |
| Syslog - IP address to which syslog entries will be sent |
| Log Level - reporting level of entries to send |
| Msg Count - current number of messages sent since system bootup |
| Also see list facilities and set facilities commands, which let you view and change |
| log reporting levels for each system facility. |
list tcp connections | Displays information about all TCP connections. Connection status is defined in |
| |
| Local Address - IP address of the local host for this connection |
| Local Port - TCP port number used by the local connection |
| Remote Address - IP address of the remote host for this connection |
| Remote Port - TCP port number used by the remote connection |
| Status - status of the connection. E.g.: Listen |
list tftp clients | Displays IP addresses of all users who allowed to use the Trivial File Transfer |
| Protocol (TFTP) to connect to the system. You must have used add network service |
| to add TFTP support to the system and used add tftp client to authorize users to |
| connect. |
list udp listeners | Displays User Datagram Protocol (UDP) ports being used by the system. These |
| ports correspond to processes which are receiving UDP data (for example SNMP, |
| User Management, TFTP service). Local IP addresses and port numbers are listed |
| for each UDP port. |
list users | Lists all users, showing: |
| User Name - user designation you specified using add user |
Login Service - The service used to login to the network (i.e. TELNET).
Status - link status: ACTIVE, INACTIVE or DISABLED
list vc Lists all virtual channel profiles, showing:
Name - user designation you specified using add vc
Network Service - type of network service: RFC1483, PPP, PPPLLC VPI - Virtual Path Identifier
