OFFICECONNECT REMOTE 812 SAMPLE

A CONFIGURATION

This section describes a sample configuration which illustrates the following

OfficeConnect Remote 812 ADSL Router features:

Address Translation

Internal DHCP Server and DNS Proxy.

￿Multiple Remote Sites, with different routing and bridging configurations.

Our sample SOHO network, shown below, has the OfficeConnect Remote 812 connected to a LAN that is using private IP addresses. The OfficeConnect Remote 812 is configured as the DHCP Server, dynamically assigning IP addresses and configuration information to each locally connected workstation. Two Remote Sites are defined, one to an ISP for Internet access, and another to the main Corporate office. IP routing is enabled for the Internet site and both IP and IPX routing as well as bridging is enabled for the Corporate site.

Our sample network is configured in 6 steps:

Global Configuration

IP LAN Network

DHCP and DNS

IPX LAN Network

Bridge LAN Network

￿Remote Sites

Remember to save your configuration using the save all command before rebooting your OfficeConnect Remote 812 so that your changes will be written to permanent FLASH memory.

Page 79
Image 79
3Com manual Officeconnect Remote 812 Sample Configuration