CLI Commands
Adds to the list of community name/IP address pairs that are allowed to receive SNMP traps. You can see the list of authorized users with the list snmp communities command.
Parameters | Description |
|
|
<name> | Group name defining who can receive SNMP traps. |
|
|
address | IP address of the SNMP manager, in the form nnn.nnn.nnn.nnn |
|
|
add syslog Adds an IP host to the list of IP hosts that will receive syslog entries. You can see | ||
<ip_name_or_addr> the current log levels for the system using list facilities, and modify the current log | ||
loglevel [loglevel] level for each facility using set facility loglevel. | ||
|
|
|
| Parameters | Description |
|
|
|
| <ip_name_or_address> | Host name or IP address of the Unix host that will receive syslog |
|
| information. |
|
|
|
| loglevel | There are five levels of logging: |
|
| CRITICAL - a serious system error, which may effect system integrity |
|
| UNUSUAL - an abnormal event, which the system should be able to |
|
| recover from |
|
| COMMON - a regularly occurring event that is not frequent |
|
| VERBOSE - a regular periodic event, e.g. a routing update message |
|
| DEBUG - for debugging only |
|
|
|
add tftp client | Adds the tftp client to the authorization table for tftp access. | ||
<ip_name_or_addr> |
|
|
|
| Parameters | Description | |
|
|
| |
| <ip_ name_or_addr> Host name or IP address of a host to be added. An address of 0.0.0.0 | ||
|
| allows all clients TFTP access. | |
add user [name] |
|
| |
{enabled [yes]} | |||
password [password] |
|
| |
| Adds a Telnet user to the local user table. The list users command displays these | ||
| parameters for all users. | ||
|
|
|
|
| Parameters | Description | |
|
|
|
|
| Name | Name of the user to be added, up to 32 ASCII characters. | |
|
|
|
|
| Password | User’s password, up to 15 ASCII characters. | |
|
|
|
|
| Enabled | This indicates whether the user is enabled. Enter YES or NO. | |
add vc [name] |
|
| |
Creates a virtual channel (VC) profile. Each profile represents a connection to a | |||
| remote site. The list vc command displays a list of all configured VCs and their | ||
| status. Use the set vc command to modify VC parameters. When a VC profile is | ||
| created, all of the different configurable parameters associated with the profile | ||
| assume default values. The default values are specified in the VC profile named | ||
| 'default'. You can display the current default values with the command show vc | ||
| default. |
|
|
|
|
| |
| Parameters | Description |
|
|
|
|
|
| name | Name of the user to be added, up to 32 ASCII characters. | |
|
|
|
|
