CLI Commands
VCI - Virtual Channel Identifier
Status - link status: ACTIVE, INACTIVE or DISABLED
login_required enables or disables CLI password protection.
password The CLI password. It must consist of 1 to 8 alphanumeric (printable) characters, inclusive.
PAUSED COMMANDS
More (or CR) | Continue printing |
Quit | Cancel rest of output |
PING
More (or CR) | Continue printing |
ping <ip_name_or_addr>
output [output_filename] count [count]
interval [interval]
timeout [timeout_value]
Sends an ICMP echo request to a remote IP host. A reply from the pinged address indicates success.
Parameters | Description |
|
|
<ip_name_or_address> | IP address in dotted notation, or host name of remote system. |
|
|
output | A file name to direct output to. |
|
|
count | Number of ICMP echo requests to send. |
|
|
interval | Number of seconds to wait between sending each request. |
|
|
timeout | Number of seconds to wait for an echo response to return. |
|
|
QUICKVC Runs the QuickVC Setup program to easily configure a virtual channel connection (remote site profile). See Chapter 5 for a complete description of the QuickVC Setup program.
REBOOT Reboot the system. If you have made any configuration changes, be sure to save all before rebooting. Also see the delete configuration command.
RENAME
rename file Renames files within the FLASH file system. The FLASH file system is a flat file <input_file> system (no subdirectories). Use the list files command to see what files currently
<output_file> exist.
Parameters | Description |
|
|
<input_file> | Name of the original file. |
|
|
<output_file> | New name for the file |
|
|
