3Com 812 manual Add snmp address IPaddress trapcommunity Name, 8APPENDIX B CLI Command Description

B-8APPENDIX B: CLI COMMAND DESCRIPTION

socket	Indicates which “socket” the server listens on. For TFTP and TELNET, it is the
	TCP or UDP port #.
enabled	This indicates whether the network service is enabled. Enter YES or NO.
data	Ancillary Data. This field contains server-specific configuration data. See the
	table on the next page for settable ancillary data parameters for TELNET.
close_active_	Indicates whether or not to close any active connections when a service is
connections	disabled by the disable network_service command. Default: FALSE.

The table below shows configurable parameters for TELNET services, which are specified with the data parameter.

Ancillary Data	Description
Parameters
auth	On indicates that login/password authentication should be performed on
	incoming connections.
	Default: on.
	Format: auth=[on/off]
login_prompt	ASCII string specifying the login prompt to be sent during authentication.
	It must be quoted.
	Default: login: “
	Format: login_prompt=[string]
login_banner	ASCII string sent to a client when the connection is made. It must be
	quoted. Default: none.
	Format: login_banner=[string]

	Add network service example:
	To configure a TELNET service to offer CLI access on port 23, doing authentication
	upon connect:
	add network_service CLI_access server_type TELNETD socket 23
add snmp community	address [IP_address]
<community_name>	￿access [RO RW]
	Adds to the list of SNMP authorized users. The community name and IP address of
	SNMP requests from managers on the network must match the list, which you can
	see using list snmp communities“	.

Parameters	Description
<community_name>	Group name that authorizes SNMP requests.
address	IP address of the SNMP manager, in the form nnn.nnn.nnn.nnn
access	Determines what type of access to SNMP MIBs the added user will have.
	Options: Read Only (RO) and Read Write (RW).

add snmp address <IP_address> trap_community

<name>