CLI Quick Setup Script 4-7
Sample Output Display as Quick Setup Executes
OCR-DSL> set system name "name"
OCR-DSL>set system location "vienna"
OCR-DSL>set system contact "jc"
OCR-DSL>set command login “yes”
OCR-DSL>set command pas s word “password”
OCR-DSL>add snmp community public address 0.0.0.0 access RW
OCR-DSL>enable security_option remote_user administration
OCR-DSL>add user "root" password "!root"
OCR-DSL>add ip network “test” interface eth:1 address 192.168.200.254/C
frame ethernet_ii enable no
OCR-DSL>set dhcp mode server
OCR-DSL>set dhcp server start 192.168.200.1 end 192.168.200.40 router
192.168.200.254 dnsl 192.168.200.254 dns2 0.0.0.0 wins1 0.0.0. wins2 0.0.0.0
mask 255.255.255.0
OCR-DSL>add dns host ocrdsl-3com.com addr 192.168.200.254
OCR-DSL>enable dns
OCR-DSL>add tftp client 0.0.0.0
OCR-DSL>set ip network “test” routing ripv2
OCR-DSL>enable ip network “test”
OCR-DSL>enable ip forwarding
OCR-DSL>add ipx network “ipx” address 12345661 interface eth:1 frame
“ethernet_ii”
OCR-DSL>disable bridge spanning_tree
OCR-DSL>add bridge network “bridge”
OCR-DSL>save all
Saving..... SAVE ALL
SAVE ALL Complete
OCR-DSL>Spawned Process CFP 282002 /./QuickSetup.commands Completed
Successfully

Quick Setup (CLI) is designed only for initial set up of the OfficeConnect Remote

812. When setup is complete, this one-time program will alter your configuration

files, which the program cannot edit. If you make an err or an d ne ed to rest art , u se

the delete configuration command to reboot an d return to factory - set default.C