3Com 812 manual Entity, PAP is the default, 48APPENDIX B CLI Command Description

SNMP User Access - ENABLED (default) or DISABLED Administration by Remote User - ON or OFF

Inbound Connections Authenticate PAP or CHAP - Choices are: CHAP, PAP, EITHER or NONE. PAP is the default

B-48APPENDIX B: CLI COMMAND DESCRIPTION

SETTINGS for PPP LINK 1 - 5 AUTHENTICATION

Operational Status - not opened or opened

Local To Remote Compression Protocol - authentication protocol used by the local PPP entity when it authenticated the itself to the remote PPP

￿entity, PAP is the default

Remote To Local Compression Protocol - authentication protocol used by the remote PPP entity when it authenticated the itself to the local PPP entity, PAP is the default

show ppp settings Displays global settings for PPP. You can modify inbound authentication using the set ppp receive_authentication command.

show security_option Displays￿status for SNMP User Access and Administration by Remote Users. You settings can modify the SNMP User Access using the enable or disable security_option

snmp commands. You can modify Administration by Remote User using the enable or disable security_option remote_user commands.

show snmp counters Displays many SNMP statistics.

INPUT COUNTERS

Packets - number of SNMP packets received

Bad Versions - SNMP messages for an unsupported SNMP version

Bad Community Names - SNMP messages which used an unknown SNMP community name

Bad Community Uses - SNMP messages which represented an SNMP operation not allowed by the SNMP community named in the message

ASN.1 Parse Errors - sum of ASN.1 or BER errors

Too Big Errors - SNMP PDUs for which the value of the error-status field is tooBig'

No Such Name Errors - SNMP PDUs where error-status field is `noSuchName'

Bad Value Errors - SNMP PDUs where error-status field is `badValue'

Read Only Errors - SNMP PDUs where the error-status field is `readOnly'

General Errors - SNMP PDUs where the error-status field is `genErr'

Total Request MIB Objects - sum of MIB objects retrieved successfully as

￿the result of receiving valid SNMP Get-Request and Get-Next PDUs

Total Set MIB Objects - sum of MIB objects altered successfully as the result of receiving valid SNMP Set-Request PDUs