CLI Commands
By default the escape character is
enable user <user Enables a user to establish TELNET sessions for remote management. You must name> have previously added the user using the add user command, where enabled is
the default. The list users command displays a summary of all configured user profiles.
enable vc <vc name> Enables a virtual channel to establish data sessions over the WAN. You must have previously added the VC using the add vc command, where disabled is the default. The list vc command displays a summary of all configured VC profiles.
exit CLI If CLI password protection is enabled, this command forces an immediate logout from the CLI. The CLI password must be entered in order to access the CLI again.
HANGUP
hangup interface Causes the connection on the specified interface to hangup (drop).
<interface_name>
hangup vc <vc_name> Causes the connection for the specified VC to drop. You can see which VCs have active connections using list vcs. Also see disable vc, which causes a VC’s session to drop, and prevents new sessions which use that VC from being established.
HELP
help <command> Provides information about possible commands and their formats. Typing help alone lists the possible commands. Typing help <command name> lists the possible parameters for that command.
Typing part of a keyword (command or parameter) and pressing Esc completes the keyword. If you have not yet entered enough of the keyword to be unique, pressing Esc causes the bell to ring.
Typing ? after a command string displays the possible keywords and values for that command.
HISTORY
history Displays your previous CLI commands. You can recall commands from the history using ^P (
KILL
kill <“process name”> Kills an active process. Use list processes to see which processes are currently active. You can only kill a process that you started. An example would be a ping that you started that you now wish to kill.
